Használati útmutató Netgear GS724EP
Netgear
nincs kategorizálva
GS724EP
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Netgear GS724EP (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 14 ember találta hasznosnak és 7.5 felhasználó értékelte átlagosan 3.9 csillagra
Oldal 1/2
Installation Guide
1. Register the switch
1. From a computer or mobile device that is connected to the Internet, visit
http://my.netgear.com.
2. Log in to your NETGEAR account.
Note: If you don’t have a free NETGEAR account, you can create one.
The My Products page displays.
3. From the menu on the left, select Register a Product.
4. In the Serial Number eld, type the serial number of your switch.
The serial number is 13 digits long. It is printed on the switch label.
5. From the Date of Purchase menu, select the date that you purchased the
switch.
6. Click the button.REGISTER
Your switch is registered to your NETGEAR account.
A conrmation email is sent to your NETGEAR account email address.
April 2021 © NETGEAR, Inc., NETGEAR and the NETGEAR Logo
are trademarks of NETGEAR, Inc. Any non‑NETGEAR
trademarks are used for reference purposes only.
Continued on the next page.
24-port Gigabit Ethernet Smart Managed Plus
Switch with PoE+ (190W)
Model GS724EP
Package contents
• NETGEAR Gigabit Ethernet Smart Managed Plus Switch
• Power cord (varies by region)
• Rack‑mount installation kit
• Rubber feet
• Installation guide
Note: We recommend that you use a Category 5e (Cat 5e) cable or higher-rated
cable for Gigabit Ethernet connections.
2. Connect the switch Sample connections
Router
Internet
Laptop
Conference phone
WiFi access point
GS724EP switch
Desktop computer
Security cameras
To use the SFP port, you must insert an SFP transceiver module, which you can
purchase from NETGEAR.
This switch is designed for indoor use only. If you want to connect it to a device
located outdoors, the outdoor device must be properly grounded and surge
protected, and you must install an Ethernet surge protector inline between the
switch and the outdoor device. Failure to do so can damage the switch.
WARNING: Before connecting this switch to outdoor cables or devices, see
https://kb.netgear.com/000057103 for safety and warranty information.
3. Check the LEDs
When you connect the power cord to the switch and plug it into an electrical
outlet, the LEDs indicate the status:
LED Description
Power LED
Solid green: The switch is powered on and operating normally.
Off. Power is not supplied to the switch.
Fan LED
Solid green: The internal fan is operating normally.
Solid amber . The internal fan failed.
PoE Max LED
(The status of
the switch’s PoE
budget.)
Off: Sufcient (more than 7W of) PoE power is available.
Solid amber: Less than 7W of PoE power is available.
Blinking amber: At least once during the previous two minutes, less
than 7W of PoE power was available.
Speed and
activity port LED
(Upper port
LED)
Solid green:1000 Mbps link on the port.
Blinking green: 1000 Mbps activity on the port.
Solid amber: 100 Mbps or 10 Mbps link on the port.
Blinking amber: 100 Mbps or 10 Mbps activity on the port.
Off. No link is detected on the port.
PoE port LED
(Lower port
LED)
Solid Green: The port is delivering PoE power.
Off: The port is not delivering PoE power.
Solid amber: A PoE fault occurred on the port.
4. Discover and access the switch
The NETGEAR Switch Discovery Tool (NSDT) lets you discover the switch in your
network and access the local browser interface of the switch from a Mac or a
Windows-based computer.
To install the NSDT, discover the switch in your network, access the switch, and
discover the switch IP address:
1. To download the tool, visit
https://www.netgear.com/support/product/netgear-switch-discovery-tool.aspx.
Download the Windows, Mac, or Linux version.
2. Temporarily disable the rewall, Internet security, antivirus programs, or all of
these on the computer that you use to congure the switch.
3. Unzip the NSDT les, and click or double-click the executable le (for
example, NDST-1.2.102.exe) to install the program on your computer.
You might see the tool icon appear on your Mac dock or Windows desktop.
4. Reenable the security services on your computer.
5. Power on the switch.
6. Connect your computer to the same network as the switch.
7. Open the NSDT.
The initial page displays a menu and a button.
8. From the Choose a Connection menu, select the network for this switch.
9. Click the Start Searching button.
The NSDT displays the IP addresses of the switches that it discovers.
10. Click the ADMIN PAGE button for the switch.
The login page or login window of the local browser user interface (UI)
opens.
11. Enter the default password that is printed on the switch label.
Note: All port LEDs are located together on the left of the front panel.
Internet
PoE+ connections
Non‑PoE connections
Termékspecifikációk
| Márka: | Netgear |
| Kategória: | nincs kategorizálva |
| Modell: | GS724EP |
Szüksége van segítségre?
Ha segítségre van szüksége Netgear GS724EP, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva Netgear
27 Március 2025
24 December 2024
14 Október 2024
13 Október 2024
6 Október 2024
4 Október 2024
2 Október 2024
1 Október 2024
28 Szeptember 2024
26 Szeptember 2024
Útmutatók nincs kategorizálva
- nincs kategorizálva Cygnett
- nincs kategorizálva Portech
- nincs kategorizálva Tronic
- nincs kategorizálva Entes
- nincs kategorizálva Air King
- nincs kategorizálva Ewent
- nincs kategorizálva Healthy Choice
- nincs kategorizálva Thermor
- nincs kategorizálva Wet Sounds
- nincs kategorizálva BCA
- nincs kategorizálva Ideal
- nincs kategorizálva Kunft
- nincs kategorizálva Pontec
- nincs kategorizálva Peugeot
- nincs kategorizálva Cowon
Legújabb útmutatók nincs kategorizálva
10 Április 2025
10 Április 2025
10 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025