Használati útmutató Netgear ProSafe AXM761

Oldalak 2 Engels nincs kategorizálva

Olvassa el ingyen online a(z) Netgear ProSafe AXM761 használati útmutatóját, vagy töltse le PDF-ben. Az útmutatót 16 ember találta hasznosnak. Kérdése van a modellről? Tegyen fel kérdést

)NSTALLATION'UIDE
e
ProSafe 10 Gigabit Ethernet SFP+ Module AXM761
Install Your Optical Module
The 10 Gigabit small form-factor pluggable (SFP+) module provides a full-duplex 10G bps
each direction for Ethernet operation on NETGEAR managed switches.
The switch will automatically detect the AXM761, so you can simply plug it into an
available module slot.
The module can be inserted or removed while the switch is operational.
AXM761
Installing a AXM761 Module
Insert the module firmly into the slot that supports the SFP+ interface. Make sure the optical
cable you use is multi mode LC to LC duplex cable.
Removing a AXM761 Module
Release the module latch by pulling down the handle bar across the module, and pull the
module out of the module slot.
Technical Specifications
StandardsIEEE 802.3ae 10GBase-SR
Wavelength 850nm
Dimensions (HxWxD)0.46” x 0.53” x 2.19”
(11.9 mm x 13.7 mm x 55.7 mm)
Weight 17.1g
Operating Temperature32 -158º F (0 - 70ºC)
Storage Temperature32 -185 ºF (0 - 85ºC)
Operative relative humidity85% @ (25ºC)
Operating Distance2 - 300 m for 50/125 um MMF
2 - 33 m for 62.5/125 um MMF
ConnectorsLC
Power Consumption<1.0w
MTBF4,986,536 hr (569 years)
Safety CertificationUL 1950 CSA 22.2 No. 950
Environmental Compliance-RoHS
AXM761_IG_10July09.fm Page 1 Friday, July 10, 2009 2:36 PM

Értékelje ezt az útmutatót

Termékspecifikációk

Márka: Netgear
Kategória: nincs kategorizálva
Modell: ProSafe AXM761

Szüksége van segítségre?

Ha segítségre van szüksége Netgear ProSafe AXM761, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek