Használati útmutató Netgear ProSafe AXM764

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Netgear ProSafe AXM764 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 17 ember találta hasznosnak.

Installation

The 10 Gigabit BASE-LR LITE SFP+ module transmits at 10 G bps over

single mode fiber (SMF) for up to 2 Km.

Install the Module

NETGEAR switches automatically detect the AXM764 module. The module

can be inserted or removed while the switch is powered on.

¾To install a module:

1. Insert the module into one of the available SFP+ module slots, pressing

firmly to seat the module.

2. Make sure that the module latch is in the closed position.

3. Connect a single-mode LC to LC duplex cable to the module.

Remove the Module

You do not need to power o the switch before removing the module.

¾To remove a module:

1. Disconnect any cables from the module.

2. Pull down on the module latch.

3. Pull the module out of the module slot.

Specifications

Specifications Description

Wavelength 1310nm

Dimensions (H x W x D).47 in. x .57 in. x 2.22 in. (11.85 mm x

14.55 mm x 56.50 mm)

Weight0.04 lb (20 g)

Operating temperature23 –158ºF (-5 – 85ºC)

Storage temperature-40 – 185ºF (-40 –85ºC)

Operative relative humidity85% at 25ºC

Operating DistanceUp to 2Km on legacy 9/125μm single

mode fiber cables.

Connectors LC

Max. power consumption1.1W

MTBF2310,000 hours (264 years)

Safety CertificationFDA/CDRH, IEC-60825

Compliance RoHS

ProSAFE 10 Gigabit BASE-LR LITE SFP+

Single Mode Module

AX764

Termékspecifikációk