Használati útmutató Neutrik NBNC75BFH6
Neutrik Lijmpistool NBNC75BFH6
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Neutrik NBNC75BFH6 (1 oldal) a Lijmpistool kategóriában. Ezt az útmutatót 24 ember találta hasznosnak és 3 felhasználó értékelte átlagosan 4.7 csillagra
Oldal 1/1

Slide the boot onto the cable
- Position the labeling to the cabelend
Slide the crimp ferrule onto the cable
Spread the braided shield
(It`s easily with the NEUTRIK
“SHIELD-SPREADING-TOOL”!)
Crimp the pin
- position the pin on the center conductor
- Crimp the pin with the tool
(For best crimping-results it is recommended to use the original
Neutrik crimp tool
- HXBNC with the corresponding insert
or hexcrimp acc. to IEC 803-W (SW 1.7)
or squarecrimp acc. to IEC 803-2 (SW 1.6)
- Pin can also be soldered (Optional)!
- Straighten the pin if misaligned.
Insert the cable into the connector body
Slide the crimp ferrule over the shield to the front
and push the cable to it`s end position until you
hear a snap noise.
Crimp the ferrule with the tool
(For best crimping-results it is recommended to use the
original Neutrik tool - HXBNC with the corresponding insert)
Snap the boot onto the connector body
Prepare cable as shown
- Use an adjustable coaxial cable stripper
®
A
A
B
C
D
D
E
E
F
G
H
I
B
C
Pin flush to the insulator
Please note:
Position the connector body
Flush with the die face.
C
RIMP
OPE
RA
T
ION
!
H
Don't damage the foil!
(if existing)
Boot
Crimp ferrule
X
Labeling
F
G
I
H
X
rearTWIST BNC 75Cable Connector -
Crimp version
|
W
ASSEMBLY INSTRUCTION
Draft. Nr.: BDA 076 / 3102M0771 Update:17.02.2012
II
Data subject to change without prior notice. 2012 NEUTRIK . ALL RIGHTS RESERVED. NEUTRIK are registered trademark.
®®
©
www.neutrik.com
Assembled Connector
[]
C: 4.16”
[]
B:5.197”
[]
A: 12.473”
NEUTRIKAGLIT: +423/2372424F: +423/232 53 93
NEUTRIKUSA Inc.USAT: +1704/972 3050F: +1704/438 9202
()
NEUTRIKUK Ltd.UKT: +441983/811441F: +441983/811439
NEUTRIK VertriebsGmbHDE/NL/AT/DKT: +498131/280890F: +498131/280830
NEUTRIK FranceFRT: +33 1 / 4131 6750F: +33 1 / 4131 0511
NEUTRIK Tokyo Ltd.JPT: +81 3 / 3663 4733F: +81 3 / 3663 4796
NEUTRIK Hong KongLtd.HKT: +852 / 2687 6055F: +852 / 2687 6052
R
R
Assembly
in UK!
Termékspecifikációk
| Márka: | Neutrik |
| Kategória: | Lijmpistool |
| Modell: | NBNC75BFH6 |
Szüksége van segítségre?
Ha segítségre van szüksége Neutrik NBNC75BFH6, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Lijmpistool Neutrik
18 Augusztus 2024
18 Augusztus 2024
18 Augusztus 2024
18 Augusztus 2024
18 Augusztus 2024
17 Augusztus 2024
17 Augusztus 2024
17 Augusztus 2024
17 Augusztus 2024
16 Augusztus 2024
Útmutatók Lijmpistool
Legújabb útmutatók Lijmpistool
15 Március 2025
27 Augusztus 2024
27 Augusztus 2024
27 Augusztus 2024
27 Augusztus 2024
27 Augusztus 2024
27 Augusztus 2024
24 Augusztus 2024
18 Augusztus 2024
17 Augusztus 2024