Használati útmutató Neutrik NBNC75BFH6X

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Neutrik NBNC75BFH6X (1 oldal) a Koax-kábel kategóriában. Ezt az útmutatót 26 ember találta hasznosnak.

/ 1 PDF

Slide the boot onto the cable

- Position the labeling to the cabelend

Slide the crimp ferrule onto the cable

Spread the braided shield

(It`s easily with the NEUTRIK

“SHIELD-SPREADING-TOOL”!)

Crimp the pin

- position the pin on the center conductor

- Crimp the pin with the tool

(For best crimping-results it is recommended to use the

original Neutrik crimp tool HX-R-BNC with appropriate

crimp die)

- Straighten the pin if misaligned.

Insert the cable into the connector body

Slide the crimp ferrule over the shield to the

front and push the cable to it`s end position

until you hear a snap noise.

Crimp the ferrule with the tool

(For best crimping-results it is recommended to use the

original Neutrik tool - HX-R-BNC with the corresponding

insert)

Snap the boot onto the connector body

Prepare cable as shown

- Use an adjustable coaxial cable stripper

®

A

A

B

C

D

D

E

E

F

G

H

I

B

C

Pin flush to the insulator

Please note:

Position the connector body

Flush with the die face.

H

Don't damage the foil!

(if existing)

rear UHD BNCTWI ST

75Cable Connector Crimp versionW

ASSEMBLY INSTRUCTION

Assembled Connector

[ ]

C: 4.16”

[ ]

B:5 .197”

[ ]

A: 12.473”

R

Draft. Nr.: BDA 398 Update: 15.04.2015

II Data subject to change without prior notice. 2015 NEUTRIK . ALL RIGHTS RESERVED. NEUTRIK are registered trademark.

® ®

©

www.neutrik.com

NEUTRIK AGLI T: F: +423 /23724 24 +423/232 53 93

NEUTRIKUSA Inc.USA T: F: +1704/972 3050 +1704/438 9202

( )

NEUTRIKUK Ltd.UK T: F: +441983/811 441 +44 1983/811 439

NEUTRIK Vertriebs GmbHDE/ NL/ AT/DK T: F: +49 8131/ 280 890 +49 8131/280 830

NEUTRIK FranceFR T: F: +33 1/4131 6750 +33 1/4131 0511

NEUTRIK Tokyo Ltd.JP T: F: +81 3/3663 4733 +81 3/3663 4796

NEUTRIK Hong KongLtd.T: F: HK +852/2687 6055 +852/2687 6052

NEUTRIK India Pvt. Ltd.INDT: F: +91/982 05 43 424 +91/22 26163 540

R

F

G

H

I

X

Boot

Crimp ferrule

X

Labeling

4K8K

8K

8K

8K

CRIMP

OPERATION!

Termékspecifikációk