Használati útmutató Nitecore UM2
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Nitecore UM2 (23 oldal) a Akkumulátor töltő kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 3.6 csillagra
Oldal 1/23
UM2
• Automatic and High-Speed Charging
• Real-time Information Display
• Over-Discharged Li-ion Battery Activation
and IMR Battery Restoration
Intelligent USB
Dual-Slot Charger
Features
Contents
English
···········································
2
Español
··········································
6
Deutsch
·········································
10
Francais
·········································
14
Русский
·········································
18
日本語
·············································
22
한국어
·············································
26
Italiano
···········································
30
Română
·········································
34
简体中文
··········································
38
IMPORTANT NOTICE CONCERNING WARRANTY
SERVICE
Thank you for purchasing! Before using this charger, please nd your
verication code on the package box, and go to http://charger.nitecore.
com/validation (or scan the QR code beside the verification code to
visit on your mobile phone). Type in your verication code and personal
information as required, and submit the page. After verification,
Nitecore will send you a warranty service email. This email and your
registration email address are essential to your possible warranty
application. Before you complete the warranty service registration, you
cannot enjoy our warranty service for your purchase.
-2-
(English) UM2 User Manual
Operating Instructions
Connect to power source: connect the UM2 to an external power source (a USB adapter, a computer or other USB
charging devices) via the USB charging cable.
Insert batteries: The UM2 features 2 independently controlled charging slots. Insert batteries of supported types
into each slot according to the polarity marks on the slot. After battery installation, the UM2 begins charging and
presents Charging Current, Battery Voltage, Charged Volume and Charging Time on the LCD screen.
Battery Inspection and Error Report: The UM2 has reverse polarity protection and anti-short circuit function. If
there are batteries inserted with polar reversed or short-circuited, the LCD screen of relevant slot will indicate “EE EE”
and the power level display will ash to notify the user of an error.
Smart charging: The UM2 can choose appropriate charging currents based on intelligent detection about battery
types and capacities. Manual charging current selection is also available. The UM2 is compatible with:
1) 3.6V/3.7V Li-ion rechargeable batteries
2) 3.8V Li-ion rechargeable batteries (4.35V±1% when fully charged)
3) 1.2V Ni-MH/Ni-Cd rechargeable batteries
4) 3.2V LiFePO4 batteries
Default Settings
The default settings (not manually congured) for the UM2 are:
Battery Type and Capacity
Standard Mode QC Mode
Default Charging
Current
Selectable Range of
Charging Current
Default Charging
Current
Selectable Range of
Charging Current
Li-ion batteries
(4.2V±1% when
fully charged)
>1,200 mAh 500mA 100mA-1,000mA 1,000mA 100mA-1,500mA
<1,200 mAh 500mA 100mA-1,000mA 500mA 100mA-1,000mA
Ni-MH/Ni-Cd
batteries (1.48V±1%
when fully charged)
AA/AAA 500mA 100mA-1,000mA 500mA 100mA-1,000mA
C/D 500mA 100mA-1,000mA 500mA 100mA-1,000mA
Note: The UM2 can automatically select charging modes for Ni-MH/Ni-Cd batteries and 3.7V Li-ion batteries. LiFePO4
batteries and 3.8V Li-ion batteries require manual settings on charging cut-o voltages. For the battery whose length
is >60mm (2.4”), the UM2 automatically identies its capacity as >1,200mAh.
Button Operations
During the charging process:
Short press the C button to cycle through the charging status of the 2 slots.
Short press the V button to cycle through Charging Current, Battery Voltage, Charged Volume and Charging time on
the LCD screen.
Long press the C button to enter the Charging Setting Mode.
Long press the V button to enter Restoration Mode. (Only eective to over-discharged IMR batteries)
After entering the Charging Setting Mode:
Short press the C button to switch to dierent setting parameters (Charging Current and Cut-O Voltage).
Short press the V button to increase with a 100mA increment each time when setting the Charging Current; or to
switch to dierent battery types and voltage readings when setting the Cut-O Voltage.
Long press the V button to directly access the maximum setting when setting the Charging Current.
Long press the C button to save and exit the Charging Setting Mode.
Note: Perform no action in 10 seconds to exit the Charging Setting Mode without saving and return to the previous
settings.
Charging Voltage Settings
The UM2 is compatible with 3.6V/3.7V Li-ion and Ni-MH/Ni-Cd batteries with automatic detection and adoption of the
suitable charging voltage. For LiFePO4 batteries and 3.8V Li-ion batteries, please follow the steps below for charging
voltage settings:
1. After the battery is inserted and the charging process begins, short press the C button to select the correct slot
and long press the C button to enter Charging Setting Mode.
2. After entering Charging Setting Mode, short press the C button. When the screen shows the ashing text “CHG.
MODE”, short press the V button to select the correct charging voltage (3.7V/4.2V/4.3V).
3. For LiFePO4 batteries, the voltage needs to be set to 3.7V. For 3.8V Li-ion batteries, the voltage needs to be set to
4.3V.
4. When the setting is nalized, long press the C button to save and exit the Charging Setting Mode.
Termékspecifikációk
| Márka: | Nitecore |
| Kategória: | Akkumulátor töltő |
| Modell: | UM2 |
Szüksége van segítségre?
Ha segítségre van szüksége Nitecore UM2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Akkumulátor töltő Nitecore
12 Január 2025
11 Január 2025
30 December 2025
17 December 2024
17 December 2024
17 December 2024
17 December 2024
17 December 2024
17 December 2024
17 December 2024
Útmutatók Akkumulátor töltő
- Akkumulátor töltő Dolgin
- Akkumulátor töltő Truper
- Akkumulátor töltő Oukitel
- Akkumulátor töltő Growatt
- Akkumulátor töltő V-TAC
- Akkumulátor töltő Media-Tech
- Akkumulátor töltő Zens
- Akkumulátor töltő Proosten
- Akkumulátor töltő Vimar
- Akkumulátor töltő Sichler
- Akkumulátor töltő Ikelite
- Akkumulátor töltő Emtop
- Akkumulátor töltő Makita
- Akkumulátor töltő Toolcraft
- Akkumulátor töltő Deye
Legújabb útmutatók Akkumulátor töltő
9 Április 2025
9 Április 2025
9 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
31 Március 2025
30 Március 2025
26 Március 2025