Használati útmutató OLLO TT-03

Olvassa el alább 📖 a magyar nyelvű használati útmutatót OLLO TT-03 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 23 ember találta hasznosnak és 9 felhasználó értékelte átlagosan 4.0 csillagra

P5

H1

I

A1

E1

P7

TOP

T1

CAUTION：This stand is intended for use only with the maximum

weight indicated .Use of this product with flat screen televisions exceeding

the maximum weight capacity may cause instability resulting in property

damage and / or bodily harm.

Do not attempt to assemble this product until all instructions and warnings

have been read and properly understood .Please keep these instructions for

future reference .

M6X25M6X12M8X18M5X25M8X30

M8

M5X12

1x

4x4x4x4x4x4x4x4x

1x1x2x1x

P1P2P3P4P5

2

1

TT-03

1x2x1x2x

P6P7P10P11

1x

P9

M6M6X16M8M8X35

3x4x12x2x8x2x1x4x2x1x

600X40035KG

+

30° / -30°

-5° /

+

10°

1x1x1x4x

T1T2T3T4

5.04.0

NOTE: Tighten the threaded rod connector (G1) ,to the base plate and then firmly

tighten the threaded rod (P9) to the connector.

P9

G1

Install threaded connector and threaded rod

11111111

16X 6.6X1.6

24X 9X2

22X 8X2

1x

P8

FRONT VIEW

REAR VIEW

Attach rubber feet to underside of glass base the rubber feet

"J" come in a strip of 4,it is printed with 3M logo on the

underside.

J X4

OK

TOP

This side up !

BACK

BOTTOM

This side against glass !

Explanation of part P7

The bolt ” I” passes through this hole.

No bolt inserted.

No bolt inserted.

This part is aligned with the front hole in

glass to ensure correct positioning.

3M LOGO

FRONT

Termékspecifikációk