Használati útmutató Optex REDWALL SIP-100-IP-BOX

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Optex REDWALL SIP-100-IP-BOX (4 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 16 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.6 csillagra

PoE IP Encoder

PIE-1

PoE IP Encoder

PIE-1

INSTALLATION INSTRUCTIONS

( for SIP series and RLS series )



No.5919420

▪ PIE-1 changes analog relay output signals (N.C.) to

original ASCII code.

▪ PIE-1 can supply power to detector using a PoE hub

or switch.

▪ Follow all cautions and instructions in this manual

before installation.

▪ Keep this manual after installation so that you can

read when necessary.

▪ Remember the meanings of “Warning” and

“Caution” below to use the product safely.

If you ignore a caution, the user or other

people may be injured or the product or

something around it may be damaged.

If you ignore a warning, the user or other

people may be injured or dead.

▪ Do not repair, dismantle or modify the product

yourself.

▪ Do not touch the product with a wet hand.

▪ Be careful not to damage other interior wiring when

installing or wiring the product.

▪ Power off the product immediately if smoke, odor or

strange sound emits from the product.

▪ Do not install the product in an extremely moist place

such as a bathroom or a place where the product

may be wet.

▪ Insert the connectors securely when wiring.

Caution

■

No. 6-32 UNC screw (5/8 inch), 6 pcs

■

Alarm 10-pin cable (26cm)

■

Power 2-pin cable (26cm)

■

Alarm 6-pin cable (10cm)

■

Alarm 4-pin cable (10cm)

■

Power 2-pin cable (10cm)

■



Main unit of PIE-1

SAFETY PRECAUTION

FEATURES

Connectors

WarningWarning

Warning: This is a class A product. In a domestic

environment this product may cause radio interference

in which case the user may be required to take

adequate measures. (EN55022)

CE Statement

Warning

Caution

■



SIP mounting plate

for Gang Box

■ Gasket sheet

for Gang Box

PARTS IDENTIFICATION

1

Ethernet connector for PoE

Ethernet connector for detector

24VDC Power output connector

12VDC Power output connector

Alarm input connector

▪

Be sure to use the attached cables.

▪

Do not use 12V and 24V power sources at the same time.

Caution

Termékspecifikációk