Használati útmutató Optex SL-650QDP-BT

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Optex SL-650QDP-BT (20 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 12 ember találta hasznosnak.

/ 20 PDF

-1-

INSTALLATION INSTRUCTIONS

No.59-1881-3 131115UL

No.59-1881-3

PHOTOELECTRIC DETECTOR

• Quad high power beams

• Double modulated beam

• Smart design

- Slim body design

- Easy-to-see vivid interior color for optical alignment

- IP65*1 waterproof structure

• 4 channel beam frequency selector

• Alignment level indicator

• Viewfinder with 2X magnification

• Various options (refer to page 20)

( HU-3*1, ABC-4*1, BC-4*1, CBR-4, PSC-4*1, BAU-4*1 )

• UL/c-UL Listed

• Beam interruption adjustment function

• D.Q. circuit (environmental disqualification)

• Tamper function

• Beam power control selector

• Alarm memory

• Sound assist function

-

Optical alignment

- Beam reception status

- Walk test

[ SL-QDM only ]

• Auto Transmit Power Control (A.T.P.C*2) to optimize the beam power

• Integrated Alignment Status Communication (I.A.S.C*

2) to

communicate the transmitter and receiver

• Re-transmitting circuit function

• Solar Battery Unit SBU-4*1 (option)

PHOTOELECTRIC DETECTOR

A photoelectric detector consists of an infrared light

source that generates IR(Infrared) beams, and an IR

receiver that detects the IR beams. The transmitter

and receiver are installed on opposite sides of the

area to be monitored. The receiver detects when the

IR beams are physically interrupted by an intruder,

and sends an alarm signal to be a control panel.

FEATURES

INTRODUCTION

1-1 BEFORE YOUR OPERATION.......................2

1-2 PRECAUTIONS

.......................................................

2

1-3 PARTS IDENTIFICATION

.....................................

3

INSTALLATION

2-1 SEPARATING.................................................4

2-2 WIRING..........................................................4

2-3 TERMINAL.....................................................5

2-4 WIRING DIAGRAM........................................5

2-5 WIRING DISTANCE BETWEEN POWER

SUPPLY AND DETECTOR............................6

2-6 WALL MOUNTING.........................................6

2-7 POLE MOUNTING.........................................8

2-8 MOUNTING IN THE BEAM TOWER..............9

2-9

INSTALLATION EXAMPLE AT PARTICULAR CASE

... 9

FUNCTION SETTING

3-1 DIP SWITCH.................................................10

3-2 BEAM POWER CONTROL SELECTOR.......10

1

2

3

4

6

7

8

9

CONTENTS

3-3 FUNCTION....................................................11

OPTICAL ALIGNMENT

4-1 OPTICAL ALIGNMENT FOR UPPER AND

LOWER BEAM..............................................15

4-2 OPERATION CHECK....................................17

TROUBLESHOOTING

5-1 TROUBLESHOOTING..................................17

OPTIONAL SETTING

6-1 HEATER UNIT HU-3 (OPTION)....................18

6-2 SOLAR BATTERY UNIT SBU-4 (OPTION)...18

DIMENSIONS

7-1 DIMENSIONS ...............................................19

SPECIFICATIONS

8-1 SPECIFICATIONS.........................................19

OPTIONS

9-1 OPTIONS......................................................20

Detection range

SL-200QDM

SL-350QDM

SL-650QDM

SL-200QDP

SL-350QDP

SL-650QDP

Advanced Standard

5

Transmitter Receiver

Smart Line series

Smart Line series

™

™ 60m/200ft.

100m/350ft.

200m/650ft.

*1 not evaluated by UL

*2 not require any additional tool

Termékspecifikációk