Használati útmutató Oricom ANU800

Oldalak 2 Engels rádió

Olvassa el ingyen online a(z) Oricom ANU800 használati útmutatóját, vagy töltse le PDF-ben. Az útmutatót 17 ember találta hasznosnak. Kérdése van a modellről? Tegyen fel kérdést

ANU800 UHF CB ANTENNA
FITTING INSTRUCTIONS
Pack includes
•Heavy duty barrel spring base
•Fibreglass radome
•Grub screw and hex key to secure the fibreglass pole
•Low-loss coaxial cable (4.5m)
•Pre-terminated FME connector and PL259 adaptor
IMPOR ANTT- Always fit in accordance with State Road & raffic Safety GuidelinesT
Installation
1.Remove the shroud protecting the cable at the base of the antenna.
2.Install the spring base onto the bracket (not supplied). Tigten in a clockwise
direction using a hexagon wrench or spanne. IMPORAN: Do not exceed 50N.rTT
3. Remove the cap from the top of the spring base and install the fiberglass
extension pole on to the base by turning in a clockwise direction and secure in pce la
with the grub screw (using the hex key provied). Hand tighten only MAX. 15N.

Értékelje ezt az útmutatót

Termékspecifikációk

Márka: Oricom
Kategória: rádió
Modell: ANU800

Szüksége van segítségre?

Ha segítségre van szüksége Oricom ANU800, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek