Használati útmutató Oricom VISO10

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Oricom VISO10 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 29 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 4.5 csillagra

3

2

PaPart A- LCDrt B- Buon

A1: Day of the Week

A2: Radio Control Icon

A3: Time

A4: Month

A5: Date

A6: Year

B1: “MODE/”Buon

B2: “▼” Buon

B3: “RESET” Buon

B4: “▲” Buon

B5: “WAVE/” Buon

Part C- Structure

C1: Hanging Hole

C2: DoorBaery

C3: Stand

1

VISO10 User Manual

1. Features

- and Understand Time displayEasy toRead

- Calendar PerpetualUp to Year 2099

- & 8 languages Day of weekMonth inuser

selectable

2. Unit Appearance

5. Lock buttons

● Hold “” (B4) buon at the same me for ▼ ▲” (B2) and “

5 seconds to lock the rest buons. When rest buons’

funcons been locked, icon “ ” displayed. Hold “▼”

(B2) and “▲” (B4) buon 5 seconds again to unlock.

6. Precauons

7. Express Warranty (Australia)

This Express Warranty is provided by Oricom Internaonal Pty

Ltd ABN 46 086 116 369, Unit 1, 4 Sovereign Place, South

Windsor NSW 2756, herein aer referred to as “Oricom”.

Oricom products come with guarantees that cannot be exclud-

ed under the Australian Consumer Law. You are entled to a

replacement or refund for a major failure and compensaon

for any other reasonably foreseeable loss or damage. You are

also entled to have the goods repaired or replaced if the

goods fail to be of acceptable quality and the failure does not

amount to a major failure.

3. Getng started:

● Open the battery Cover (C2).

● Insert 2 x AA size alkaline batteries observing polarity [“+”

and “–“marks]. There is “click” sound when insert batteries

to remind user the batteries was inserted correctly.

● Replace the battery compartment cover.

● Place the unit onto flat surface; the unit is ready for

use now.

4. Time Setng

4.1 Manual Time Setng:

● In me display, hold “MODE/ ” buon (B1) for 3

seconds to enter Clock/Calendar seng Mode.

● The seng sequence is shown as follow:, Weekday & Month

Language, 12/24 Hr, RCC (Radio Clock) ON/OFF, Time Zone,

Hour, Minute, Year, Month, Day, DST.

● There are 8 languages, English, German, French, Spanish,

Italian, Dutch, Polish and Swedish, for day-of-week & Month.

● Press “” (B2) or “▼ ▲” (B4) buon to adjust the seng and

press “MODE” buon (B1) to confirm each seng.

● (By keeping the “” (B2) or “▼ ▲” (B4) buon pressed, could

accelerate the process and reach the desired value more

quickly)

To do this:

1) In me display, hold “MODE/ ” Buon (B1) for

3 seconds to enter Clock/Calendar seng Mode.

2) Press “” (B2) or “▼ ▲” (B4) buon to navigate to the

RCC (Radio Clock) ON/OFF seng.

3) Ensure that RCC is set to RCC OFF inside of Australia.

4) Confirm the selecon by clicking the “MODE/ ”

Buon (B1).

4.2 Radio Controlled Time:

● The Radio Controlled Time seng on the VISO10 will not

work in Australia. Ensure this is turned off in the sengs.

● The clock loses its me informaon when the baery is

removed.

● Use a pin to press the reset buon if the Unit does not

work properly.

● Do not expose it to direct sunlight, heavy heat, cold, high

humidity or wet areas.

● Never clean the device using abrasive or corrosive materials

or products. Abrasive cleaning agents may scratch plasc

parts and corrode electronic circuits.

Termékspecifikációk