Használati útmutató OSD Audio R62SS
Oldalak 4 Angol hangszóró
Olvassa el ingyen online a(z) OSD Audio R62SS használati útmutatóját, vagy töltse le PDF-ben. Az útmutatót 15 alkalommal tekintették meg. Kérdése van a modellről? Tegyen fel kérdést
BLACK SERIES INSTALL GUIDE
Preparation:
Installation:
Tools For InstallationSpeaker Wire Guide
Considerations
Cut Out
Placement
- Pencil
- Drill
- Tape Measure
- Wire Cutter
- Phillips Screwdriver
- Utility Knife
- Safety Eye Wear
- Gloves
- Sandpaper
- Where is the best place to install the speakers?
- Where do the speakers sound the best?
- Separate the speakers 6 - 10 feet apart.
- (For Ceiling LCR models only) Place speakers with the 15°
angled woofer pointed towards the main listening area.
- If you intend to paint the grilles, do so before installation.
NOTE: This is the most important part of the entire installation.
If you are not certain whether any obstructions exist behind the
desired mounting area, you should start by cutting a small hole in
the center of your penciled mounting hole with a drywall saw.
Trace along the included template. Cut along the traced line using a
drywall saw or rotary drill. Use a piece of sandpaper to sand down the
cut out edge for a smoother contour. (See Diagram 2.)
There are many options for proper speaker placement depending
upon speaker type and application. It’s important to carefully plan the
placement of your speakers, as installation requires that you cut a
hole in your wall or ceiling.
(See Diagram 1.) Typical speaker placement for a 5.1 and 7.1
speaker system.
18AWG minimum - for distances up to …………………. 10 ft
16AWG - from …………………………………..…... 10 to 50 ft
14AWG - from …………………………………...… 50 to 100 ft
TV
Diagram 2
Diagram 1
Termékspecifikációk
| Márka: | OSD Audio |
| Kategória: | hangszóró |
| Modell: | R62SS |
Szüksége van segítségre?
Ha segítségre van szüksége OSD Audio R62SS, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek