Használati útmutató Ozito PXWLS-800U

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Ozito PXWLS-800U (2 oldal) a Lampa kategóriában. Ezt az útmutatót 29 ember találta hasznosnak.

/ 2 PDF

size 445 x 210 mm

Danger! - Read the operating instructions to re-

duce the risk of inquiry

Caution! Do not look into the light beam.

The reprinting or reproduction by any other me-

ans, in whole or in part, of documentation and

papers accompanying products is permitted only

with the express consent of the iSC GmbH.

Subject to technical changes

PXWLS-800U

GBAdditonal operating & safety instructions Cordless Worklight

Service information

We have competent service partners in all countries named on the guarantee certicate whose contact

details can also be found on the guarantee certicate. These partners will help you with all service re-

quests such as repairs, spare and wearing part orders or the purchase of consumables.

In the eect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Plea-

se ensure that you provide a precise description of the problem and answer the following questions in all

cases:

•

Did the equipment work at all or was it defective from the beginning?

•

Did you notice anything (symptom or defect) prior to the failure?

•

What malfunction does the equipment have in your opinion (main symptom)?

Describe this malfunction.

Charger indicator / Fast Charger

Indicator status

Explanations and actions

Red LEDGreen LED

OFlashingReady for use

The charger is connected to the mains and is ready for use; there is no

battery pack in the charger

OnOCharging

The charger is charging the battery pack in quick charge mode.

OOnThe battery is 85% -100% charged and ready for use.

(Charging time for 1.5 Ah battery: 30 min)

(Charging time for 2.0 Ah battery: 40 min)

(Charging time for 3.0 Ah battery: 60 min)

(Charging time for 4.0 Ah battery: 80 min)

(Charging time for 5.2 Ah battery: 105 min)

Action:

Take the battery pack out of the charger. Disconnect the charger from

the mains supply.

FlashingOAdapted charging

The charger is in gentle charging mode.

For safety reasons the charging is performed less quickly and takes

more than 1 hour. The reasons can be:

- The battery pack has not been used for a very long time or an already

at battery was further discharged (exhaustive discharge).

- The battery pack temperature is outside the ideal range (between 25°

C and 45° C).

Action:

Wait for the charging to be completed; you can still continue to charge

the battery pack.

FlashingFlashingFault

Charging is no longer possible. The battery pack is defective.

Action:

Never charge a defective battery pack.

Take the battery pack out of the charger.

OnOnTemperature fault

The battery pack is too hot (e.g. due to direct sunshine) or too cold

(below 0° C).

Action:

Remove the battery pack and keep it at room temperature (approx. 20°

C) for one day .

Termékspecifikációk