Használati útmutató PAC APH-TY01

PAC hi-fi rendszer APH-TY01

Olvassa el alább 📖 a magyar nyelvű használati útmutatót PAC APH-TY01 (2 oldal) a hi-fi rendszer kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 4.5 felhasználó értékelte átlagosan 4.7 csillagra

Letöltés PDF
Oldal 1/2
Speaker Connection Harness for Select
Toyota Vehicles with Factory Ampliers
Equipped with a 10-Pin and 12-Pin Connector
C
Page 1
Copyright © 2019. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
APH-TY01
Rev: V1
Date: 010419
Introduction and Features
The APH-TY01 simplies speaker wire connections when adding aftermarket ampliers. Aftermarket ampliers can be
easily added with no need to cut or modify a vehicle’s original wiring. Each pair of wires has been labeled with the
corresponding speaker name.
Wiring Overview
Harness 1 (APH-TY01 12P):
Installation Notes
1. It is always best to use a tone generator (PAC part number TL-PTG2) to verify that the tables in this manual, and the labels
on the wires, match the wiring in your specic vehicle. This is important as there are instances where different trim levels of
the factory system may have the speaker outputs in different locations.
2. Not all applicable vehicles will come equipped with a corresponding speaker for all of the wires populated in our harness. It is
important to understand which speakers are equipped in your vehicle.
3. If you are leaving any of the factory speakers connected to the factory amplier, simply connect the speaker wires (color for
color) between the male and female connectors. For example: If you want the rear speakers to be powered by the factory
amplier, simply connect the Green, Green / Black, Purple and Purple / Black wires from the male connector to the Green,
Green / Black, Purple and Purple / Black wires from the female connector.
4. For vehicles that lose audio output when there is no load on the speaker outputs of the factory amplier, PAC load resistors
will be required (PAC Part Number LR335 or LR475).
1. Locate the vehicle’s factory amplier and disconnect the 10-pin and 12-pin connectors.
2. Connect the APH-TY01 harness to the connectors that were disconnected in the previous step.
3. Connect the male connectors from the APH-TY01 to the amplier.
4. Connect the longer loose wires from the APH-TY01 to your aftermarket amplier outputs or passive crossovers according to
the tables in this manual.
5. Insulate unused wires in the 10-pin and 12-pin connectors that plug into the factory amplier side of the APH-TY01.
Installation Steps
Connect to aftermarket amplier
output or passive crossover.
*Illustration is for reference only.
Your harness will have more wires*
PinNumber WireColor Description Label
1 Black PassThrough(Ground)
6 Brown PassThrough(Ground)
2 Black PassThrough
3 Brown PassThrough
4 Gray FrontRight+
10 Gray/Black FrontRight‐
11 Orange Speaker3+
5 Orange/Black Speaker3‐
12 Blue Speaker4+
7 Blue/Black Speaker4‐
9 White FrontLeft+
8 White/Black FrontLeft‐
N/A
FRSpeaker
Speaker3
Speaker4
FLSpeaker
12‐Pin
Insulate any unused wires
APH-TY0112P
Speaker1
Speaker2
RRSpeaker
RLSpeaker
White / Black
White
Gray / Black
Orange
Blue
Black
Black
Brown
Brown
Gray
Orange / Blac
k
Blue / Black
1
7
8
12
Black
Black
Brown
Brown
1
7
8
12
Gray
Or
ange / Black
Blue / Black
White / Black
White
Gray / Black
Orange
Blue
Speaker Connection Harness for Select
Toyota Vehicles with Factory Ampliers
Equipped with a 10-Pin and 12-Pin Connector
C
Page 2
Copyright © 2019. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
APH-TY01
Rev: V1
Date: 010419
Wiring Overview (cont.)
Harness 2 (APH-TY01 10P):
Connect to Aftermarket amplier
output or passive crossover.
*Illustration is for reference only.
Your harness will have more wires*
PinNumber WireColor Description Label
1 Yellow PassThrough(Constant12v+)
7 Yellow PassThrough(Constant12v+)
8 Red Speaker1+
2 Red/Black Speaker1‐
4 Brown Speaker2+
3 Brown/Black Speaker2‐
9 Green RearLeft+
5 Green/Black RearLeft‐
6 Purple RearRight+
10 Purple/Black RearRight‐
N/A
Speaker1
Speaker2
RLSpeaker
RRSpeaker
10‐Pin
Insulate any unused wires
APH-TY0110P
Speaker3
Speaker4
FRSpeaker
FLSpeaker
Yellow
1
6
10
7
Red / Black
Brown
Green / Black
Purple
Brown / Black
1
6
7
10
Red
Green
Purple / Black
Red / Black
Brown
Green / Black
Purple
Brown / Black
Yellow Yellow Yellow
Red
Green
Purple / Black

Termékspecifikációk

Márka: PAC
Kategória: hi-fi rendszer
Modell: APH-TY01

Szüksége van segítségre?

Ha segítségre van szüksége PAC APH-TY01, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók hi-fi rendszer PAC

PAC

PAC IS77 Útmutató

14 Augusztus 2024
PAC

PAC APH-TY01 Útmutató

8 Augusztus 2024

Útmutatók hi-fi rendszer

Legújabb útmutatók hi-fi rendszer

NEC

NEC NP01SW1 Útmutató

9 Április 2025
Klipsch

Klipsch ProMedia Ultra 2.0 Útmutató

6 Április 2025
Vaxis

Vaxis Atom 500 Útmutató

2 Április 2025
INKEE

INKEE Benbox Útmutató

1 Április 2025
JL Audio

JL Audio SlamPak SLPK-CAN-SPYDER1 Útmutató

31 Március 2025
Teradek

Teradek Bolt 10K Útmutató

29 Március 2025
Teradek

Teradek Bolt 500 Útmutató

29 Március 2025
Teradek

Teradek Cubelet 655 Útmutató

29 Március 2025
Teradek

Teradek Cube Series Útmutató

29 Március 2025
Teradek

Teradek Cube 725 Útmutató

29 Március 2025