Használati útmutató PAC CP1-FRD1

Olvassa el alább 📖 a magyar nyelvű használati útmutatót PAC CP1-FRD1 (3 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 26 ember találta hasznosnak.

© 2023 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.

PAC-Audio.com

C

Page 1

Rev: V1

Date: 021323

CANPRO Harness

for Select Ford Vehicles

CP1- FRD1

Output 8 Pos. 250mA

Output 7 Pos. 250mA

Output 6 Pos. 250mA

Output 5 Pos. 250mA

Output 4 Pos. 250mA

Output 3 Speed Pulse

Output2 Pos. 250mA

Output1 Pos. 250mA

Output 9 Neg. 250mA

The CP1-FRD1 is a factory matched plug & play harness for use with the CANPRO CP1-S CAN-Bus Interface Module

for select Ford Model applications using the 8pin data harness for connection at the Steering Column Control Module

(SCCM). The harness and module allow a simple and safe way to access vehicle information, status and triggers from

the CAN-Bus for a wide range of aftermarket uses such as radar detectors, camera activation, sound system upgrades,

lighting and more!

Introduction and Features

Important Notes

1. Any unused outputs should be insulated to prevent shorting.

2. The outputs of the CANPRO are low current (250mA) and require the use of a separate relay if additional current is required.

3. The vehicle should be in a resting state prior to opening connection to the 8pin data harness. See Installation note for further

information.

Wiring Connection Chart

Outputs

To Factory

Harness

Description

Description

Description

DescriptionDescriptionPolarity

Polarity

Polarity

PolarityPolarityWire Color

Wire Color

Wire Color

Wire ColorWire Color

Output 1Accessory+ Positive (250mA)White-Red

Output 2Illumination+ Positive (250mA)Blue

Output 3Speed PulsePulseGreen-Black

Output 4

Reverse+ Positive (250mA)Violet-Black

Output 5Ignition*+ Positive (250mA)Yellow-Black

Output 6Left Turn Signal+ Positive (250mA)Red-Black

Output 7

Right Turn Signal+ Positive (250mA)Gray-Red

Output 8

High Beam+ Positive (250mA)Blue-Black

Output 9

Parking Brake- Negative (250mA)Brown-Black

Output Wires

1-9

DIP Switches

16pin

Interface

Connector

Status

LED

CANPRO CP1-S

* In Electric Vehicles, Output 5 provides a positive output when the vehicle is in a “Ready to Drive” state.

To Vehicle's

SCCM

Termékspecifikációk