Használati útmutató Panduit DIFBA3003S00S

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Panduit DIFBA3003S00S (4 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2.5 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/4
FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2014 V00029ES
Page 1 of 4
DIFBA3003S00S
(installed in Net-Access
S-Type Server Cabinet)
Switch Inlet Duct
(DIFBA3003S00S)
Cisco Nexus 93128 Switch
(reference)
For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS V00029ES
Page 2 of 4
Intended
Mounting
Location
(3 rack spaces)
Prepare Switch for Ducting Installation
-Remove bottom screws from front of switch rails and discard.
FRONT OF
CABINET
Install Cage Nuts
-Insert [4] Bonding cage nuts per equipment rail in rack space immediately above switch rails, at front of cabinet
FRONT OF
CABINET
[4] Bonding Cage Nuts
(install in Rack Space
above switch rails)
For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS V00029ES
Page 3 of 4
FRONT OF
CABINET
Install Switch Ducting
-Secure DIFBA3003S00S switch ducting to equipment rails with [8] new screws and the two bottom screws taken out earlier.
-Do not tighten [2] bottom screws --- Leave slightly extended for Front Perforated Plate installation (see page 4)
[2] Bottom Screws
Provided in kit (with matching cage nuts if needed)
(leave slightly extended)
[8] Bonding Screws
Adjust Switch Ducting
-Use [4] wing nuts and tooth washers to adjust position of switch duct seals
-Install foam seal (if necessary) to seal ducting to bottom of switch
[4] Wing Nuts and Tooth Washers
Install Foam Seal
(if necessary)

Termékspecifikációk

Márka: Panduit
Kategória: nincs kategorizálva
Modell: DIFBA3003S00S

Szüksége van segítségre?

Ha segítségre van szüksége Panduit DIFBA3003S00S, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek