Használati útmutató Panduit LCA4-38-L

Panduit kompresszor LCA4-38-L

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Panduit LCA4-38-L (3 oldal) a kompresszor kategóriában. Ezt az útmutatót 20 ember találta hasznosnak és 10.5 felhasználó értékelte átlagosan 4.6 csillagra

Oldal 1/3
COPPER COMPRESSION CONNECTORS
For Technical Support: panduit.comtechsupport@
Page 1 of 4
INSTALLATION INSTRUCTIONS T-PMPI-63-PC
C
Panduit Corp. 2024
Rev 1 1
1. Use a connector marked for the wire size and wire material to be used. NEVER
use a copper connector on aluminum wire.
Strip wire insulation to approximate length shown on tool chart. DO NOT nick
or
ring the conductor strands.
Clean the wire.
Insert stripped wire into connector until the wire stops.
Using installation tooling shown on other side, insert connector in die and crimp
between color bands or knurl markings, use these markings as a guide to evenly
space crimps on barrel of connector. Begin crimping near the tongue end of
the lug and continue crimping toward the wire end.
IMAGES BELOW DEPICT CRIMP ZONES, AND SERVE AS GENERAL GUIDELINES FORA
THE CRIMP AREA. REQUIRED NUMBER OF COMPRESSIONS SHOWN ON TOOL
CHART IN ( ) ON PAGES 2,3 & 4 BASED ON TOOL AND DIE COMBINATION USED.
6.
After crimping, inspect for sharp edges, flash or burrs and remove if present.
COPPER COMPRESSION CONNECTOR INSTALLATION
1
1 2
1 2 3
1 2 3 4
# ZONESOF CRIMP : 1
# ZONESOF CRIMP : 2
# ZONESOF CRIMP : 3
# ZONESOF CRIMP : 4

Termékspecifikációk

Márka: Panduit
Kategória: kompresszor
Modell: LCA4-38-L

Szüksége van segítségre?

Ha segítségre van szüksége Panduit LCA4-38-L, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek