Használati útmutató Panduit POEXRX1

Panduit Vevő POEXRX1

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Panduit POEXRX1 (4 oldal) a Vevő kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/4
For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2018 PN636
Page 1 of 4
PoE Extenders
Part Number(s): POEXTX1, POEXRX1, POEXRX4, POEXKIT1, POEXKIT4
Installation Steps for Extender Kits
4 IP
Devices
Switch
Local Power Option
Data and Power Over 4-Pair UTP up
to 2,000ft (610m)
Local Power Option
Product Details (POEXTX1)
• Paired with POEXRX1 or POEXRX4
• Up to 50W PoE
• Need to be locally powered when non-PoE switch is used
• IEEE compliant
Product Details (POEXRX4)
• Paired with POEXTX1
• 1 uplink port & 4 downlink ports
• Max 30W per downlink port
• Supports IEEE compliant devices
• Can be locally powered for additional PoE delivery
4-Port PoE Extender Kit (POEXRX4 + POEXTX1 + 110W, 55V Power Supply)
Product Details (POEXTX1)
• Paired with POEXRX1 or POEXRX4
• Up to 50W PoE
• Need to be locally powered when non-PoE switch is used
• IEEE compliant
Product Details (POEXRX1)
• Paired with POEXTX1
• Up to 50W PoE
• PoE on 4 pairs
• IEEE compliant
• Can be locally powered for additional PoE delivery
Data and Power Over 4-Pair UTP up
to 2,000ft (610m)
IP DeviceSwitch
Local Power Option
Local Power Option
• Remove the PoE Extender transmitter (POEXTX1) and receiver (POEXRX1 or POEXRX4)
from their packaging.
• Ensure your cable is properly terminated before connecting to any PoE Extender product.
• Connect the transmitter (POEXTX1) port marked "TO SWITCH" to a port on the switch.
•Connect the Category 5e or higher (Category 6 recommended) copper cable from the
transmitter (POEXTX1) port marked "TO RX" to the receiver (POEXRX1 or POEXRX4) port
marked "TO TX".
Bandwidth Availability
100Mbps full duplex, symmetrical to 2,000 feet (610m) over 4-Pair UTP Copper Cable
1-Port PoE Extender Kit (POEXRX1 + POEXTX1 + 60W, 55V Power Supply)
• Using a copper cable or patch cord, connect the IP devices to the receiver (POEXRX1 or POEXRX4) port marked "TO IP
DEVICE"
• If using the local power option (supplied with POEXKIT1 or PO rd from the car-EXKIT4), remove the power supply and co
ton.
1. Plug the DC barrel connector of the power supply into the PoE Extender box to be locally powered. The 110W is
recommended for POEXRX4; the 60W supply can power either the POEXTX1 or POEXRX1.
2. Plug the AC power cord, into the power supply and then into a local AC, grounded outlet.
3. If the PoE receiver is locally powered and the PoE transmitter is not, the port on the switch or device the PoE
transmitter is connected to must be PoE capable.
For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2018 PN636
Page 2 of 4
PoE Length Guidelines for 1-Port Extender Kit
PoE
Class Standard
Max
Wattage
at PD
Under
Voltage
Lockout at
PD
PSE - TX1
TX1 - RX1 - Cable
Distance (ft)
RX1 - PD
23AWG
1.04Ω/100ft
24AWG
1.43Ω/100ft
1 802.3af 3.84 37
50ft
2000 2000
50ft
2 802.3af 6.49 37 2000 2000
3 802.3af 12.95 37 1791 1303
4 802.3at 25.5 42 1257 914
5 802.3bt N/A N/A N/A N/A
6 802.3bt N/A N/A N/A N/A
Scenario 1: 1 Port (POEXTX1) Transmitter Box Powered by 50W Power Sourcing Switch (assuming 55VDC output)
PoE
Class Standard
Max
Wattage
at PD
Under
Voltage
Lockout at
PD
SW - TX1
TX1 - RX1 - Cable
Distance (ft)
RX1 - PD
23AWG
1.04Ω/100ft
24AWG
1.43Ω/100ft
1 802.3af 3.84 37
Up to 100m
2000 2000
50ft
2 802.3af 6.49 37 2000 2000
3 802.3af 12.95 37 1798 1303
4 802.3at 25.5 42 1263 915
5 802.3bt N/A N/A N/A N/A
6 802.3bt N/A N/A N/A N/A
Scenario 2: 1 Port (POEXTX1) Transmitter Box Locally powered (55VDC output)
PoE
Class
Standard
Max
Wattage
at PD
Under
Voltage
Lockout at
PD
PSE - TX1
TX1 - RX1 - Cable
Distance (ft) RX1 - PD
23AWG
1.04Ω/100ft
24AWG
1.43Ω/100ft
1 802.3af 3.84 37
50ft
2000 2000
50ft
2 802.3af 6.49 37 2000 2000
3 802.3af 12.95 37 2000 2000
4 802.3at 25.5 42 2000 2000
5 802.3bt 40 42 2000 2000
6 802.3bt N/A N/A N/A N/A
Scenario 3: 1 Port (POEXRX1) Receiver Box Locally powered (PoE Switch at head end)
For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2018 PN636
Page 3 of 4
PoE
Class
(4 ports)
Standard
Total
Wattage
Available
for PD(s)*
Under
Voltage
Lockout at
PD
PSE - TX1
TX1 - RX4 - Cable
Distance (ft) RX4 - PD(s)
23AWG
1.04Ω/100ft
24AWG
1.43Ω/100ft
1 802.3af 15.36 37
50ft
2000 2000
50ft
2 802.3af 25.96 37 2000 2000
3 802.3af 51.8 37 2000 2000
4 802.3at 102 42 2000 2000
5 802.3bt N/A N/A N/A N/A
6 802.3bt N/A N/A N/A N/A
PoE
Class
(4 ports)
Standard
Total
Wattage
Available
for PD(s)*
Under
Voltage
Lockout at
PD
SW - TX1
TX1 - RX4 - Cable
Distance (ft) RX4 - PD(s)
23AWG
1.04Ω/100ft
24AWG
1.43Ω/100ft
1 802.3af 15.36 37
Up to 100m
2000 2000
50ft
2 802.3af 25.96 37 1798 1303
3 802.3af N/A N/A N/A N/A
4 802.3at N/A N/A N/A N/A
5 802.3bt N/A N/A N/A N/A
6 802.3bt N/A N/A N/A N/A
* - Total wattage available refers to the maximum amount of power available at the PD. For example, in Class 2 scenario
above which shows 25.96 W available this can support four Class 2 devices or two Class 3 devices.
Scenario 2:1 port (POEXTX1) Transmitter Box Locally powered (55VDC output)
Scenario 3: 4 port (POEXRX4) Receiver Box Locally powered (PoE Switch at head end)
PoE Length Guidelines for 4-Port Extender Kit
* - Total wattage available refers to the maximum amount of power available at the PD. For example, in Class 2 scenario
above which shows 25.96 W available this can support four Class 2 devices or two Class 3 devices.
* - Total wattage available refers to the maximum amount of power available at the PD. For example, in Class 2 scenario
above which shows 25.96 W available this can support four Class 2 devices or two Class 3 devices.
PoE
Class
(4 ports)
Standard
Total
Wattage
Available
for PD(s)*
Under
Voltage
Lockout at
PD
PSE - TX1
TX1 - RX4 - Cable
Distance (ft)
RX4 - PD(s)
23AWG
1.04Ω/100ft
24AWG
1.43Ω/100ft
1 802.3af 15.36 37
50ft
2000 2000
50ft
2 802.3af 25.96 37 1791 1303
3 802.3af N/A N/A N/A N/A
4 802.3at N/A N/A N/A N/A
5 802.3bt N/A N/A N/A N/A
6 802.3bt N/A N/A N/A N/A
Scenario 1: 4 Port (POEXRX4) Receiver Box Powered by 50W Power Sourcing Switch (assuming 55VDC output)

Termékspecifikációk

Márka: Panduit
Kategória: Vevő
Modell: POEXRX1

Szüksége van segítségre?

Ha segítségre van szüksége Panduit POEXRX1, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Vevő Panduit

Panduit

Panduit POEXRX4 Útmutató

14 Augusztus 2024
Panduit

Panduit POEXRX1 Útmutató

13 Augusztus 2024

Útmutatók Vevő

Legújabb útmutatók Vevő

Yamaha

Yamaha Aventage RX-A4A Útmutató

9 Április 2025
Yamaha

Yamaha Aventage RX-A8A Útmutató

9 Április 2025
DJI

DJI D-RTK 3 Útmutató

5 Április 2025
Phonocar

Phonocar PH544 Útmutató

5 Április 2025
QSC

QSC SPA-Qf 60x2 Útmutató

2 Április 2025
Harper

Harper HDT2-5010 Útmutató

2 Április 2025
Harper

Harper HDT2-2010 Útmutató

2 Április 2025
Alpine

Alpine MRX-F65 Útmutató

31 Március 2025
Streacom

Streacom TL1 Útmutató

31 Március 2025
Pro-Ject

Pro-Ject Stereo Box DS Útmutató

30 Március 2025