Használati útmutató PCE Instruments PCE-191 CB
PCE Instruments
Mérőberendezések
PCE-191 CB
Olvassa el alább 📖 a magyar nyelvű használati útmutatót PCE Instruments PCE-191 CB (10 oldal) a Mérőberendezések kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 4.5 felhasználó értékelte átlagosan 4.6 csillagra
Oldal 1/10

INSTRUCTION MANUAL
Cable Detector
PCE-191 CB
PCE Americas Inc.
711 Commerce Way
Suite 8
Jupiter
FL-33458
USA
From outside US: +1
Tel: (561) 320-9162
Fax: (561) 320-9176
info@pce-americas.com
www.pce-instruments.com/english
www.pce-instruments.com
PCE Instruments UK Ltd.
Unit 11
Southpoint Business Park
Ensign way
Hampshire / Southampton
United Kingdom, SO31 4RF
From outside UK: +44
Tel: (0) 2380 98703 0
Fax: (0) 2380 98703 9
info@pce-instruments.co.uk

-1-
Operation voltage
Operation frequency
Transmitter power
Receiver power
: 220 ~ 240Vac
: 50 / 60 Hz
: powered by wall outlet
: powered by 9V battery
Safety Precaution
Electricity can cause severe injuries.
Therefore it is very important to read the following info
before using PCE-191 CB.
This instrument must only be used and operated by a
competent trained person and in strict accordance with
the instructions. We will not accept liability for any
damage or injury caused by misuse or non compliance
with instructions and safety procedures.
Always check the battery of the PCE-191 CB receiver is
working properly before testing.
Specifications

-2-
1. Remove the battery cover of the receiver.
2. Connect a 9V battery to the battery holder.
3. Put the battery into the battery compartment.
4. Put the battery cover back.
1. Plug the transmitter into the electrical wall outlet that
users want to test. The lamp on the transmitter
should be on.
2. Turn the receiver on just until click is heard and you
can see the LED lights.
That is the maximum sensitivity of the receiver.
3. Put the receiver near transmitter as shown in figure 1.
If the receiver is working and the outlet power is on,
the receiver will produce a beep and the LED will
flash.
Preparation
Unit Test
Battery Installation
Termékspecifikációk
Márka: | PCE Instruments |
Kategória: | Mérőberendezések |
Modell: | PCE-191 CB |
Szüksége van segítségre?
Ha segítségre van szüksége PCE Instruments PCE-191 CB, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Mérőberendezések PCE Instruments
29 Március 2025
28 Március 2025
28 Március 2025
28 Március 2025
28 Március 2025
28 Március 2025
28 Március 2025
28 Március 2025
28 Március 2025
28 Március 2025
Útmutatók Mérőberendezések
- Mérőberendezések Siglent
- Mérőberendezések Kopp
- Mérőberendezések Etymotic
- Mérőberendezések AkYtec
- Mérőberendezések Noyafa
- Mérőberendezések REV
- Mérőberendezések Murideo
- Mérőberendezések Pancontrol
- Mérőberendezések Enda
- Mérőberendezések Johnson Level
- Mérőberendezések Techno Line
- Mérőberendezések Testec
- Mérőberendezések Camille Bauer
- Mérőberendezések Tempest
- Mérőberendezések Victron Energy
Legújabb útmutatók Mérőberendezések
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025