Használati útmutató Phanteks Glacier R160C

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Phanteks Glacier R160C (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 25 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.7 csillagra

GLACIER R160C/R220CMANUAL V1.0

STEP 1. OVERVIEW

PH-R160C_02/PH-R220C_02

INSTALLATION

PACKAGE CONTENTS

R160C or R220C

Fan Bracket

160/220 D-RGB strip

Stop Fitting

(pre-installed)

M4x25 Pump Screws

M4x10 Bracket Screws

M4x6 LED-strip Screws

Fan Screws

3mm Allen Key

D-RGB cable

D-RGB Motherboard cable

3x

4x

2x

2x

4x

STEP 2. INSTALL DDC PUMP

A. Remove the original DDC pump top.

B. Install the DDC pump using the M4x25mm screws

and the original O-ring.

FILL PORT

OUTLET

INLET

-DRAIN PORT

-SENSOR PORT

INLET-

DRAIN PORT-

SENSOR PORT-

Make sure the DDC pump is mounted

correctly and no cables are pinched.

M4x25mm

The R160C/R220C is equipped with multiple ports to

allow for more exibility. Please plan your water

loop before proceeding with installation.

DISCLAIMER - This product is intended for advanced users.

Please consult with a qualied technician for installation. Phanteks

assumes no liability for any damages occurring as a result of using

Phanteks cooling products.

WARNING - Power down the system before installation.

- Do not disassemble the reservoir. Warranty will be voided.

- Perform a leak test before turning on the system.

- Check our website for the latest installation guide.

GLACIER R220

GLACIER R160

DDC pump

4x

42mm pitch mounting holes

Tighten the pump screws evenly in a

diagonal pattern for an even pressure.

B.A.

The R160C/R220C can be used in 3 orientations:

Termékspecifikációk