Használati útmutató Pioneer CA-R-NI.005AE

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Pioneer CA-R-NI.005AE (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.8 csillagra

Installation Manual CA-R-NI.005AF

Nissan Qashqai SWC

Installation must be performed by a qualified professional installer only, with appropriate equipment. The manufacturer is not liable for any kind of incidental or indirect damages.

03/2015 All rights reserved. No liability for misprints

3 Plug-in all connections. Verify the

proper functioning of the system.

2 Connect the grey-red (CAN-H) and the

grey-blue (CAN-L) cables to the vehicle's

OBD connector (which is located under the

steering wheel), if the rear view camera only

is installed.

1 Press the ENTER button on the steering wheel and scroll with the

up/down arrows until the brand of the radio unit is displayed.

Press the ENTER button and hold it until the display shows the

"CH TIME" message.

1 Remove the original head unit. Connect the

ISO to the radio harness, the SWC Jack, and

all other needed connectors.

2 Use the buttons:

- SEEK+ to increase minutes

- SEEK- to increase hours

Press the ENTER key to confirm the changes.

DOCUMENTS TO BE ATTACHED TO THE CUSTOMER'S VEHICLE -- INSTRUCTION FOR SETTING THE CLOCK ON THE VEHICLE'S DISPLAY

RADIO

HARNESS

CAR

HARNESS

PIN 6 → CAN-H

(Grey/Blue)

PIN 14 → CAN-L

(Grey/Red)

OBD CONNECTOR

CONNECTOR'S FRONT VIEW

In order to prevent ESD damage, the

SWC Jack must be connected before

plugging the connectors on car side

(see point 3)

Termékspecifikációk