Használati útmutató Planet POE-400

Planet hálózati kártya/adapter POE-400

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Planet POE-400 (4 oldal) a hálózati kártya/adapter kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/4

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Introduction

1.1 Checklist

Thank you for purchasing our POE-400 IEEE 802.3af Power

over Ethernet Injector Hub, your Power over Ethernet

Injector Hub package shall contains following contents:

Check the contents of your package for following

parts:

l Power over Ethernet Injector Hub x 1

l User’s Manual CD x 1

l Power Adapter x 1

l Power Cord x 1

If any of these pieces are missing or damaged, please

contact your dealer immediately, if possible, retain the

carton including the original packing material, and use them

against to repack the product in case there is a need to

return it to us for repair.

1.3 Features

u Complies with IEEE 802.3, IEEE 802.3u, 10/100Base-TX

u Complies with IEEE 802.3af, 48V DC power over unused

twisted-pair wires

u 4-Port IEEE 802.3af in-line mid-span power injector box

u Full power support for per POE port

u Circuit protection prevent power interference between

ports

u LED indicator power input indication

u Desktop palm size

2.2 POE-400 and POE-152S, the IEEE

802.3af Injector / Splitter and Equipment

Installation

For the places hard to nd the power inlet, the POE-400

provide the easiest way to power your Ethernet devices

such as PLANET IEEE 802.3af Power over Ethernet Splitter

(POE-152S) with Internet Camera (ICA-M220) or Wireless

Access Point (WNAP-3000PE) installed in the small ofce.

To control the power system of your networking devices, the

POE-400 can directly co-work with PLANET ICA-HM230 and

POE IP Phone VIP-351PT to build VoIP telephony network in

the ofce. Besides, the POE-400 can be directly deployed to

connect the third party IEEE 802.3af devices like Cisco AP

and POE switches installed 100 meters away.

1.5 Product Outlook

LED Denition:

LED Color Function

Power Green Lights to indicate that the POE-400

has power.

PoE Ready /

In-Use Green Lights to indicate the port is

providing 48VDC in-line power.

1.2 About the Power over Ethernet Injector

Hub

The PLANET POE-400 is a 4-Port IEEE 802.3af Power over

Ethernet injector hub complied with IEEE 802.3, IEEE

802.3u and IEEE 802.3af standards. Equipped with 4

10/100Base-TX Fast Ethernet ports, the POE-400 supports

full 48V DC power for any remote IEEE 802.3af powered

device (PD) like Wireless LAN Access Point, IP Phone, and

LAN Camera. Supporting power supply of 70 Watts, POE-

400 provides sufcient power to the 4 remote devices.

There are 8 RJ-45 STP ports on POE-400. Half of the ports

on right panel function as "Data" and the other half on left

panel function as "Data and Power". Each of the "Data

and Power" port as an injector which inserts DC Voltage

into the CAT 5 cable allowing the cable between the Injector

and Splitter to transfer data and power simultaneously.

1.4 Specication

Model POE-400

Ethernet Connector

8-Port RJ-45 STP with 4-Port

"Data" and 4-Port "Data and

Power"

Ethernet Data Rate 10/100Mbps (vary on Ethernet

device attached)

Input Voltage DC 48V, 1.5A

Number of Device

can be Power 4

Ethernet Cable TIA/EIA-568, Category 5/5e cable

LED Indicator 1 x power, 4 x POE ready / in-use

Operating

Environment 0~50 Degree C, 5%~90%RH

Storage Environment -10~70 Degree C, 5%~90%RH

Dimension

(H x W x D) 26 x 70 x 97mm

Weight 220g

Emission FCC Class B, CE mark

Standard Compliance

IEEE 802.3 Ethernet

IEEE 802.3u Fast Ethernet

IEEE 802.3af Power over Ethernet

2. Hardware Installation

This product provides two different running speeds –

10Mbps, 100Mbps, in the same device and automatically

distinguishes the speed of incoming connection.

This section describes the hardware features of POE-400.

Before connecting any network device to the POE-400, read

this chapter carefully.

2.1. Before Installation

Before your installation, it is recommended to check your

network environment. If there is any IEEE 802.3af devices

need to power on, the POE-400 can provide you a way

to supply power for this Ethernet device conveniently and

easily. The POE-400 equips with an AC-DC adapter with

DC 48V input and injects this DC power into the pin of the

twisted pair cable (pair 4, 5 and pair 7, 8).

If there is very difcult to nd a power socket for AC-DC

Adapter of your non-IEEE 802.3af networked device, the

POE-400 and POE-152S can provide you a way to supply

DC power for this Ethernet device conveniently and easily.

The 10Mbps or 100Mbps speed, duplex mode from Data

port of POE-400 depends on which Ethernet device

attached.

Notebook

PCPCPCPC

Internet Camera

POE-Splitter

Switch

POE-400

POE-AP

VoIP Phone

PoE

DC Power Line (DC)

100Base-TX UTP

PoE

100Base-TX UTP with PoE

Figure 1: Connection architecture over POE-400

Note

1. According to IEEE 802.3af standard, the

POE-400 will not inject power to the cable

if not connecting to IEEE 802.3af devices.

2. Due to the capability of IEEE 802.3af

standard, the POE-400 can directly connect

with any IEEE 802.3af end-nodes.

- 9 -

- 10 -

- 11 -

- 12 - - 13 - - 14 -

3. Troubleshooting

This chapter contains information to help you solve

problems. If the PoE Injector Hub is not functioning

properly, make sure the PoE Injector Hub was set up

according to instructions in this manual.

How to let my non IEEE 802.3af network devices

can work with POE-400?

Solution:

You can use PLANET Power over Ethernet Splitter, such as

PLANET POE-152S to work as a power transformer between

POE-400 and non IEEE 802.3af devices. Two types of POE-

152S are available for different voltage, 5V DC and 12V DC.

The PoE LED is not lit

Solution:

Check the cable connection between POE-400 and IEEE

802.3af device.

Appendix A Networking Connection

Switch's RJ-45 Pin Assignments

10/100Mbps, 10/100Base-TX

RJ-45 Connector pin assignment

Contact

MDI

Media Dependant

Interface

MDI-X

Media Dependant

Interface -Cross

1 Tx + (transmit) Rx + (receive)

2 Tx - (transmit) Rx - (receive)

3 Rx + (receive) Tx + (transmit)

4, 5 IEEE 802.3af DC 48V

6 Rx - (receive) Tx - (transmit)

7, 8 IEEE 802.3af DC 0V

Why I connect my PoE device to POE-400 and it

cannot power on?

Solution:

1. Please check the cable type of the connection from POE-

400 to the other end. The cable should be an 8-wire UTP,

Category 5/5e, EIA568 cable within 100 meters. A cable

with only 4-wire, short loop or over 100 meters, all will

affect the power supply.

2. Please check and assure the device that fully complied

with IEEE 802.3af standard.

The standard RJ-45 receptacle/connector

There are 8 wires on a standard UTP/STP cable and each

wire is color-coded. The following shows the pin allocation

and color of straight cable and crossover cable connection:

Straight Cable

Cross Over Cable

SIDE 1

SIDE 2

SIDE 1

SIDE 2

12345678

SIDE 2

1 = White/Orange

2 = Orange

3 = White/Green

4 = Blue

5 = White/Blue

6 = Green

7 = White/Brown

8 = Brown

1 = White/Orange

2 = Orange

3 = White/Green

4 = Blue

5 = White/Blue

6 = Green

7 = White/Brown

8 = Brown

SIDE 1 SIDE 2

1 = White/Orange

2 = Orange

3 = White/Green

4 = Blue

5 = White/Blue

6 = Green

7 = White/Brown

8 = Brown

1 = White/Green

2 = Green

3 = White/Orange

4 = Blue

5 = White/Blue

6 = Orange

7 = White/Brown

8 = Brown

Figure A-1: Straight-Through and Crossover Cable

Please make sure your connected cables are with same pin

assignment and color as above picture before deploying the

cables into your network.

Energy Saving Note of the Device

This power required device does not support Standby mode

operation.

For energy saving, please remove the power cable to

disconnect the device from the power circuit.

Without removing power cable, the device will still

consuming power from the power source. In the view of

Saving the Energy and reduce the unnecessary power

consuming, it is strongly suggested to remove the power

connection for the device if this device is not intended to be

active.

Termékspecifikációk

Márka:	Planet
Kategória:	hálózati kártya/adapter
Modell:	POE-400

Szüksége van segítségre?

Ha segítségre van szüksége Planet POE-400, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók hálózati kártya/adapter Planet

Planet IPOE-270-12V Útmutató

9 Augusztus 2024

Planet WNL-U556M Útmutató

8 Augusztus 2024

Planet WNL-U554A Útmutató

5 Augusztus 2024

Planet HPOE-2400G Útmutató

3 Augusztus 2024

Planet WNL-U555HA Útmutató

2 Augusztus 2024

Planet VC-203PT Útmutató

2 Augusztus 2024

Planet POE-400 Útmutató

2 Augusztus 2024

Planet POE-163 Útmutató

30 Július 2024

Planet POE-152 Útmutató

30 Július 2024

Planet POE-164 Útmutató

27 Július 2024

Útmutatók hálózati kártya/adapter

Legújabb útmutatók hálózati kártya/adapter

Mikrotik RB493 Útmutató

8 Április 2025

EtherWAN EX41941F Útmutató

3 Április 2025

Vigitron MaxiiView Vi00023 Útmutató

3 Április 2025

AVPro Edge AC-MXNET-10G-TCVR Útmutató

2 Április 2025

EtherWAN TG103H-0802 Útmutató

2 Április 2025

AVPro Edge MXNet AC-MXNET-10G-TCVR Útmutató

1 Április 2025

ScreenBeam ECB6250 Útmutató

30 Március 2025

Ubiquiti Networks USW-Aggregation Útmutató

29 Március 2025

Vigitron Vi22601 Útmutató

15 Március 2025

Vigitron Vi22201 Útmutató

15 Március 2025