Használati útmutató Planet POE-E201

Planet wifi ismétlő POE-E201

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Planet POE-E201 (10 oldal) a wifi ismétlő kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/10
- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
1.2 Key Features
IEEE 802.3at / 802.3af Power over Ethernet compliant
Complies with IEEE 802.3 / 802.3u / 802.3ab
10/100/1000Base-T
Extends the range of PoE an additional 100 meters
(328ft.)
Auto-detect and protect of PoE equipment from being
damaged by incorrect installation
Multiple units, daisy-chain installation support
Forwards both Ethernet data and PoE power to
remote device
No external power cable installation required
Compact size, Wall-mountable design
Plug-and-Play installation
1. Introduction
1.1 Package Contents
Thank you for purchasing PLANET POE-E201 IEEE
802.3at Power over Gigabit Ethernet Extender, your
Power over Gigabit Ethernet Extender package shall
contains following contents:
Check the contents of your package for following parts:
IEEE 802.3at Power over Gigabit Ethernet Extender x 1
User's Manual x 1
If any of these pieces are missing or damaged, please
contact your dealer immediately, if possible, retain the
carton including the original packing material, and use
them against to repack the product in case there is a
need to return it to us for repair.
1.3 TechnicalSpecication
Model POE-E201
Interfaces
LAN IN
1 x 10/100/1000Base-T Ethernet with
IEEE 802.3at / 802.3af PoE “Data
+
DC”
in Auto MDI/MDI-X, Auto-negotiation
RJ-45 connector
LAN OUT
1 x 10/100/1000Base-T Ethernet with
IEEE 802.3at / 802.3af PoE “Data
+
DC”
out Auto MDI/MDI-X, Auto-negotiation
RJ-45 connector
Power over Ethernet
PoE Standard IEEE 802.3af Power over Ethernet
IEEE 802.3at High Power over Ethernet
PoE Power Supply
Type Mid-Span / Type B
PoE Power Output 52V DC, 510mA, Max. 26 Watts
Power Pin
Assignment 4/5(+), 7/8(-)
Maximum
Distance
4 units, daisy-chain installation with
500m support
2.2 Ports Connection
IN Port
Connect the PoE IN port from following
802.3at / 802.3af PSE device through a
CAT-5/5e/6 UTP cable:
• PoE Injector
• PoE Injector Hub
• PoE Ethernet Switch
• Previous POE-E201
OUT
Port
Connect the PoE OUT port to following
802.3at / 802.3af device through aPD
CAT-5/5e/6 UTP cable:
• PoE IP Camera • PoE VoIP Phone
• PoE Wireless AP
• PoE Splitter
• Next POE-E201
2.3 LEDDenition:
LED Color Function
PoE IN Green
Lights to indicate the port is
providing 52-56V (802.3at) / 48V
(802.3af) DC in-line power.
LNK/
ACT Green
Lights to indicate the port is link
up.
Blink: indicate that the extender is
actively sending or receiving data
over port.IN
PoE
OUT Green
Lights to indicate the port is
providing 52-56V (802.3at) / 48V
(802.3af) DC in-line power.
Network Cable
10Base-T: 4-Pair UTP Cat. 5 up to 100m
(328ft)
100Base-TX: 4-Pair UTP Cat. 5 up to
100m (328ft)
1000Base-T: 4-Pair UTP Cat. 5e, 6, up to
100m (328ft)
EIA/TIA-568 100-ohm STP (100m, 328ft)
Standards Conformance
Regulation
Compliance FCC Part 15 Class A, CE
Standard
Compliance
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit
Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at High Power over Ethernet
IEEE 802.3x Flow Control
Environment
Operating
Temperature: -10 ~ 60 Degree C
Relative Humidity: 5 ~ 95%
(non-condensing)
Storage
Temperature: -40 ~ 85 Degree C
Relative Humidity: 5 ~ 95%
(non-condensing)
Note
Distance will often be shorter due to power
delivery voltage-drop on the wire. The maximum
distances will vary on the quality of the UTP cable
and environment.
Hardware Specication
Data Rate 10/100/1000Mbps
Switch
Architecture Store-and-Forward
Switch
Throughput
10Mbps: 14880pps@64Bytes
100Mbps: 148810pps@64Bytes
1000Mbps: 1488000pps@64Bytes
Maximum Frame
Size 1552Bytes
Flow Control Back pressure for Half-Duplex
IEEE 802.3x Pause Frame for Full-Duplex
LED Indicators
• 1 x PoE IN (Green)
• 1 x LAN Data (Green)
• 1 x PoE OUT (Green)
Protection ESD (Ethernet): 2KV (TBD)
Surge (EFT for power): 2KV (TBD)
Dimension
(W x D x H) 94 x 70 x 26 mm
Weight 197g
Power
Requirement
IEEE 802.3at compliant with voltage
within 52V-56V DC
Power
Consumption 3.2 Watts (system maximum)
Mechanical Metal / Wall Mountable
2. Hardware Description
2.1 Product Outlook
26.50 22.50
3. Hardware Installation
This product provides three different running speeds –
10Mbps, 100Mbps and 1000Mbps in the same device
and automatically distinguishes the speed of incoming
connection.
This section describes the hardware features of
POE-E201. Before connecting any network device to the
POE-E201, read this chapter carefully.
3.1 Before Installation
Before your installation, it is recommended to check
your network environment. If there is any far away
IEEE 802.3at / 802.3af devices need to power on, the
POE-E201 can provide you a way to supply power for
this Ethernet device conveniently and easily.
The POE-E201 is installed between the PSE (Power
Source Equipment) and the PD (Powered Device); it is
powered by PSE and forwards the Ethernet data and
remaining PoE power to the PD. The POE-E201 doesn’t
require an external power supply and it can be installed
easily just plug and play; that means the operator does
not need to congure the POE-E201. The POE-E201
injects power to the PDs without affecting the data
transmission performance. It offers a cost effective and
quick solution to extend power and data an additional
100m.
- 9 -
- 10 -
- 11 -
- 12 - - 13 - - 14 -
Note
1. To provide you better PoE power and data
extension quality, we strongly recommend that
you use “Solid UTP Cable” when installing
POE-E201.
2. The POE-E201 can be installed with third-party
device if the device complied with IEEE 802.3at
/ 802.3af standard.
3.2 Connect POE-E201 to the Power Source
Equipment (PSE)
There are 2 RJ-45 ports in the PoE Extender, of which
the port functions as “IN” "PoE (Data and Power)
input" “OUT” and the port on the other side functions
as "PoE (Data and Power) output".
Step 1: Connect a standard Cat.5/5e/6 UTP cable from
Power Source Equipment (PSE), such as
PoE Switch, PoE Injector hub and single port
PoE injector, to the “IN” port of POE-E201.
Step 2: The PSE delivers both Ethernet Data and PoE
power over UTP cable to the POE-E201 and the
“PoE IN” LED will be steady on.
Note
1. The POE IN LED turn on steady green means
POE-E201 is being powered successfully with
PoE class 0.
2. If POE IN LED does not turn on, please check
the remote PSE or the cable with a PC or a
network device to see if the cable is correct. Or
with an IEEE 802.3at / 802.3af device such as
the target PD to check the power injection is
correct either.
3.4 Multiple PoE Extender Installation
The POE-E201 PoE Extender supports multiple units,
daisy-chain installation. They can be employed in
series for even longer distances based on remote
PoE IP Camera or PoE Wireless Access Point power
requirement.
Step 1: Connect the additional Cat.5/5e/6 cable from
the “OUT” port of the rst POE-E201, the
other end of the UTP cable be used to connect
to the port of remote / next POE-E201.“IN”
Step 2: “PoE OUT” The LED indicator of the rst
POE-E201 will be steady to shows it is
providing power to next PoE Extender.
Step 3: “PoE IN” The LED on the next POE-E201 will
steady on.
3.3 Connect POE-E201 to the Powered
Device (PD)
Step 3: Connect the additional Cat.5/5e/6 cable
that will be used to connect to the remote
Powered Device (PD) “OUT” to the port of
POE-E201.
Step 4: "OUT" The port is also the power injectors
which transmit DC Voltage to the Cat.5/5e/6
cable and transfer data and power
simultaneously between the PSE and PD.
Step 5: Once POE-E201 detects the existence of an
IEEE 802.3at / 802.3af device, the “PoE OUT”
LED indicator will be steady, ON to shows it is
providing power.
PoE IP Camera
POE-E201
802.3at
PoE Extender
802.3at
PoE Injector
PoE P oE
AC
100M100M
200M
DC
Power Line (AC)
AC
DC Power Line (DC)
1000Base-T UTP
PoE
1000Base-T UTP with PoE
Note
1. If the connected device is not fully complying
with IEEE 802.3at / 802.3af standard or in-line
power device, the PoE OUT LED indicator of
POE-E201 will not be steady on.
2. According to IEEE 802.3at / 802.3af standard,
the POE-E201 will not inject power to the cable
if not connecting to a standard IEEE 802.3at /
802.3af device.
Step 4: Connect the additional Cat.5/5e/6 cable to the
remote PoE powered device to the “OUT” port
of next or third POE-E201.
POE-E201
802.3at PoE Ethernet
Switch/Injector Hub
UPS
PoE
100M
PoE
100M
Outdoor IR
IP Camera
non-PoE IP Camera
802.3at
PoE Splitter
PoE
PoE
PoE
100M
100M
100M
PoE
PoE
PoE
100M
100M
100M
DC
Power Output
300m 200m 100m 0m Distance
AC
AC
400m500m
POE-E201
802.3at
PoE Extender
802.3at
PoE Extender
802.3at
PoE Extender
802.3at
PoE Extender
802.3at
PoE Extender
802.3at
PoE Extender
POE-E201
802.3at
PoE Extender
POE-E201
PoE
100M
POE-E201
PoE
100M
POE-E201
PoE IP Camera
POE-E201
Power Line (AC)
AC
DC Power Line (DC)
1000Base-T UTP
PoE
1000Base-T UTP with PoE
Note
1. Per POE-E201 will take 3.2 Watts maximum for
the system itself, please check the total power
consumption of your IEEE 802.3at / 802.3af
PD and the POE-E201 before you make the
daisy-chain connection. If the overall power
consumption is overloaded, the local PSE could
shutdown the whole power system.
2. Per POE-E201 cable segment is limited in 100
meters Cat.5/5e/6 UTP wire from its IN/OUT
port to the other data end, use of any other
non standard cable or over distance could re-
sults in unstable connection.
3.5 Optional - DIN-Rail Mounting
There are two DIN-Rail holes on the left side of the
POE-E201 that allows the Extender can be easily
installed with DIN-Rail mounting. The PLANET optional
DIN-Rail mounting Kit – RKE-DIN can be order
separately. When need to replace the wall mount
application with DIN-Rail application on the POE-E201,
please refer to following gures to screw the DIN-Rail on
the Extender. To hang the POE-E201, follow the below
steps:
Step 1: screw the DIN-Rail on the POE-E201.
Step 2: Lightly press the button of DIN-Rail into the
track.
1
2
Step 3: Check the DIN-Rail is tightly on the track
You must use the screws supplied with the
mounting brackets. Damage caused to the parts
by using incorrect screws would invalidate your
warranty.

Termékspecifikációk

Márka: Planet
Kategória: wifi ismétlő
Modell: POE-E201

Szüksége van segítségre?

Ha segítségre van szüksége Planet POE-E201, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók wifi ismétlő Planet

Planet

Planet WNAP-1110 Útmutató

10 Október 2024
Planet

Planet LRP-104CET Útmutató

30 Szeptember 2024
Planet

Planet POE-E201 Útmutató

22 Szeptember 2024
Planet

Planet IPOE-E202 Útmutató

3 Augusztus 2024
Planet

Planet LRP-101U-KIT Útmutató

31 Július 2024
Planet

Planet VC-231G Útmutató

29 Július 2024
Planet

Planet UPOE-2400G Útmutató

26 Július 2024
Planet

Planet WRE-1200-EU Útmutató

26 Július 2024
Planet

Planet POE-E304 Útmutató

20 Július 2024
Planet

Planet GRT-401 Útmutató

19 Július 2024

Útmutatók wifi ismétlő

Legújabb útmutatók wifi ismétlő

Evga

Evga 100-2W-0028-LR Útmutató

30 Március 2025
Evga

Evga 100-2W-0027-LR Útmutató

30 Március 2025
Mercusys

Mercusys ME80X Útmutató

25 Március 2025
TP-Link

TP-Link RE220 Útmutató

13 Január 2025
Manhattan

Manhattan 525664 Útmutató

12 Január 2025
D-Link

D-Link DMG-112A Útmutató

6 Január 2025
Mercusys

Mercusys Halo H1200G Útmutató

4 Január 2025
HELGI

HELGI HLG0372 Útmutató

3 Január 2025
Medion

Medion P85032 (MD 87070) Útmutató

31 December 2025
TP-Link

TP-Link RE3000X Útmutató

31 December 2025