Használati útmutató Polsen MO-CPL2

Polsen mikrofon MO-CPL2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Polsen MO-CPL2 (6 oldal) a mikrofon kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 5.5 felhasználó értékelte átlagosan 4.6 csillagra

Oldal 1/6
PRODUCT
MANUAL
WITH USB TYPE-C CONNECTOR
AND HEADPHONE JACK
LAVALIER
MICROPHONE
MO-CPL2
O V E R V I E W
1. Tie clip
2. Omnidirectional mic capsule
3. LED indicator
4. A/D converter
5. Headphone jack
6. USB Type-C connector
Also included:
Foam windscreen
Carry pouch
P R E C A U T I O N S
Please read and follow these instructions, and keep
this manual in a safe place.
Keep this product away from water and any
flammable gases or liquids.
Do not attempt to disassemble or repair this
product.
Make sure that this product is intact and that there
are no missing parts.
All images are for illustrative purposes only.
3
4
65
12
R EC OR DI NG I NS T RUC T ION S
Important! The MO-CPL2 is disabled when an
incoming phone call is received. To ensure your
recording is not interrupted by a phone call, enable
Airplane Mode in your phone s settings.'
1. Plug the USB-C connector into your mobile device
or computer. The LED indicator on the A/D
converter will blink to confirm that it’s connected
and receiving power.
2. Plug your headphones into the headphone jack.
Note: The headphone jack is for playback only. You
cannot monitor your recording through the
headphones.
3. Place the windscreen over the mic capsule, attach
the mic clip, and then attach the clip to your
subject. The mic should be approximately 6 to 8
inches from the sound source.
4. Open a compatible audio or video recording app on
your device. The LED indicator on the A/D converter
lights up during recording.

Termékspecifikációk

Márka: Polsen
Kategória: mikrofon
Modell: MO-CPL2

Szüksége van segítségre?

Ha segítségre van szüksége Polsen MO-CPL2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek