Használati útmutató Pro-Ject Sumiko Olympia
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Pro-Ject Sumiko Olympia (4 oldal) a DJ Gear kategóriában. Ezt az útmutatót 11 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.4 csillagra
Oldal 1/4
Thank you for your purchase of a Sumiko Oyster Series phono cartridge. Sumiko Oyster™ cartridges are
products resulting from over four decades of cartridge design. We believe that delivered high
performance can be achieved at reasonable prices. The Oyster™ line is the embodiment of this
philosophy. Oyster™ is your ticket of entry for the “high end” –- a world of high technology, where
companies go to great lengths to recreate music in your home. The Oyster™ Series offers superior
construction and sound quality with an emphasis on real world performance. Whether you have
purchased a moving magnet or moving coil Sumiko Oyster™, you can be assured of performance and
quality second to none. Enjoy your new cartridge.
Instructions
Mounting: The stylus/cantilever assembly is the most fragile part of any phono cartridge. Please use
extreme caution while handling the cartridge and keep the stylus guard mounted whenever possible to
prevent damage during the mounting process.
Do not solder the leads to the cartridge terminals as excessive heat may permanently damage the
cartridge.
Once the cartridge is mounted, balance the tonearm for the proper vertical tracking force indicated for
each model cartridge (see specifications at the end of this manual). To set the tracking force, first balance
the tonearm. Locate the counterweight. On virtually all pivoted tonearms, it will be located at the rear of
the tonearm (meaning at the opposite end from the cartridge). Generally, it looks like a fairly large,
shallow cylinder, usually black in color and often has numbers (indicating grams of force) ranging from 0
to 3 or more printed on it. As you move the counterweight backwards, the cartridge end of the arm will
lighten (reducing stylus tracking weight), while moving the counterweight forward will increase the stylus
tracking weight. The first objective is to "statically balance" the arm, which is to achieve the proper weight
balance such that the arm "floats" level. Practice a bit and you'll find it's fairly easy to achieve. Remember
to exercise caution so that the stylus and cantilever are kept clear of any obstructions and are prevented
from striking anything that could cause damage. After achieving static balance, adjust the counterweight
to the desired tracking force by bringing the weight in toward the cartridge. Do not apply anti-skate until
the cartridge is aligned. This will be addressed later in the setup process.
We recommend the use of a high-quality alignment protractor to determine correct cartridge positioning
for the minimum tracking error. If none are available, follow the tonearm manufacturer’s guidelines for
overhang and offset angle. Then, tighten the mounting bolts.
Note: Do not over tighten the mounting bolts as this may cause damage to the cartridge and is not
necessary for optimum performance.
Termékspecifikációk
| Márka: | Pro-Ject |
| Kategória: | DJ Gear |
| Modell: | Sumiko Olympia |
Szüksége van segítségre?
Ha segítségre van szüksége Pro-Ject Sumiko Olympia, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók DJ Gear Pro-Ject
20 Szeptember 2024
14 Szeptember 2024
1 Szeptember 2024
3 Augusztus 2024
1 Augusztus 2024
31 Július 2024
28 Július 2024
28 Július 2024
27 Július 2024
26 Július 2024
Útmutatók DJ Gear
- DJ Gear Teac
- DJ Gear Nektar
- DJ Gear Envivo
- DJ Gear Suonobuono
- DJ Gear PLAYdifferently
- DJ Gear Trevi
- DJ Gear Korg
- DJ Gear The T.mix
- DJ Gear Glorious
- DJ Gear Rane
- DJ Gear Monkey Banana
- DJ Gear Velleman
- DJ Gear Fluid
- DJ Gear Pangea Audio
- DJ Gear Zomo
Legújabb útmutatók DJ Gear
15 Március 2025
12 Január 2025
12 Január 2025
8 Január 2025
6 Január 2025
6 Január 2025
6 Január 2025
6 Január 2025
6 Január 2025
6 Január 2025