Használati útmutató Proaim CT-SDCF-SD
Proaim
nincs kategorizálva
CT-SDCF-SD
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Proaim CT-SDCF-SD (4 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 5.5 felhasználó értékelte átlagosan 4.1 csillagra
Oldal 1/4

What s In The Box’
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Smart Lock Boom Drawer for Soundchief Cart -
Workstaon (CT SDCF SD)- -
A s s e m b l y M a n u a l
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Proaim Smart Lock Drawer for Soundchief Cart -
1 x L type Allen key -(5/16”)
1 x Wrench (17)

2
• Properly detach the upper and lower secon
of the Soundchief Cart (Not Included).
• Remove the bolts on the boom wheel
bracket of the Soundchief cart (Not Included)
with the help of an Allen key.
Smart Lock Boom Drawer- Setup
• Push the pin up slightly to properly detach the
side panels and remove it properly from the
Smart Lock drawer.-
• Follow the same process for removing the
side panel of another side.
• Using a wrench, unscrew the bolt on the
inner bar of the Soundchief cart
(Not Included) so that the upper and lower
secons can be separated.
• Place the side panel in the center of the upper
or lower secon of the cart , (Not Included)
and then insert the bolt by matching the hole.
Side Panel Detachment from Proaim Smart Lock Drawer -
Push Pin

3
• Insert the Allen bolt matching the thread
holes of the cart and side panels.
• Insert the Smart Lock drawer manually by -
sliding it into the side panel, as shown in the
image.
NOTE: The soft closing side panel prevents the -
colliding & crashing of gears that is inside the
drawer.
NOTE: Proaim Smart Lock Drawer is a deep & -
fully enclosed drawer that takes in all suitable
audio/video producon accessories & facilitates
convenient access to them along with protec-
on.
• Secure the side panel to the lower secon of
the cart using washers and ghten it with the
help of a wrench.
• Re-insert the bolts into the wheel bracket
aer aaching the side panel to the
Soundchief cart and securely (Not Included)
ghten the bolts with the help of an Allen
key.
• Follow the same process as above to secure
another side panel.
Termékspecifikációk
Márka: | Proaim |
Kategória: | nincs kategorizálva |
Modell: | CT-SDCF-SD |
Szüksége van segítségre?
Ha segítségre van szüksége Proaim CT-SDCF-SD, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva Proaim
2 Április 2025
2 Április 2025
2 Április 2025
2 Április 2025
2 Április 2025
28 December 2024
28 December 2024
28 December 2024
28 December 2024
28 December 2024
Útmutatók nincs kategorizálva
- nincs kategorizálva NUX
- nincs kategorizálva Monacor
- nincs kategorizálva Kasp
- nincs kategorizálva Nicols
- nincs kategorizálva Nexibo
- nincs kategorizálva ALC
- nincs kategorizálva RCBS
- nincs kategorizálva Hasselblad
- nincs kategorizálva Muse
- nincs kategorizálva Brady
- nincs kategorizálva Cypress
- nincs kategorizálva AV:link
- nincs kategorizálva Milesight
- nincs kategorizálva Logik
- nincs kategorizálva Rolls
Legújabb útmutatók nincs kategorizálva
10 Április 2025
10 Április 2025
10 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025