Használati útmutató Projecta HDBT104

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Projecta HDBT104 (8 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 6.5 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/8
P/No. HDBT104
Tray Fitting Instructions to suit Auxiliary battery for
Toyota 100 & 105 Series, Petrol & Diesel
Years: 1998–2007
Models: 1HDFTE 6 Cyl 4.2 TDI
All can be used as a 3rd tray for models 1HZ 6 cylinder 4.2 Diesel,
1FZFE 6 cylinder 4.5 Litre Petrol
HEAVY DUTY DUAL BATTERY TRAY
2
IMPORTANT SAFETY INFORMATION
Please read this instruction thoroughly before fitting the tray.
This product is recommend to be fitted by a workshop or qualified mechanical person.
WARNINGS
Before installation, make sure that the vehicle is stationary and the wheels chocked.
Be careful when laying wires, not to cause any electrical shorts or wire breakage.
After installation ensure the bonnet can close without hitting the newly installed battery
and battery tray.
SPECIFICATIONS
Max Battery Size (mm) L265 x W174 x H220
Max Battery Weight 21Kg
Recommended batteries Exide LCS 24-86, Exide Orbital, Optima D34 & Century NS70T
Approximate fitting time 2 hours
Special tools None required
Recommended Dual P/n: IDC25, DBC150, VSR200
Battery System
Tray Location Engine Bay, Passenger side near firewall
KIT INCLUDES
Special Top
Mount
Fuel Filter
Bracket
Tray
J Bolts
Hardware
4 x M6 Bolt
1 x M6 Nut
1 x M6 Bolt countersunk
5 x M6 Nuts
3 x Body Washer
1 x M6 Weld Bolt
2 x M8 Bolt Long
2 x M8 Bolt Short
2 x M8 Nut
1. Make sure that the vehicle is stationary, the engine is switched off and
cool. Disconnect the negative battery terminal from the main battery.
2. Remove fuel filter/Primer and Bracket.
3. Remove Computer and Bracket.
3
FITTING INSTRUCTIONS

Termékspecifikációk

Márka: Projecta
Kategória: nincs kategorizálva
Modell: HDBT104

Szüksége van segítségre?

Ha segítségre van szüksége Projecta HDBT104, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek