Használati útmutató Projecta HDBT110

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Projecta HDBT110 (16 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 17 ember találta hasznosnak és 9 felhasználó értékelte átlagosan 4.4 csillagra

Oldal 1/16
P/No. HDBT110
Tray Fitting Instructions to suit Auxiliary battery for
TOYOTA Landcrusier Prado 120 Series
Years: 2003 to 2009
Models: 1KD–FTV, 3.0 Litre Turbo Diesel
HEAVY DUTY DUAL BATTERY TRAY
2
IMPORTANT SAFETY INFORMATION
Please read this instruction thoroughly before fitting the tray.
This product is recommend to be fitted by a workshop or qualified mechanical person.
WARNINGS
Before installation, make sure that the vehicle is stationary and the wheels chocked.
Be careful when laying wires, not to cause any electrical shorts or wire breakage.
After installation ensure the bonnet can close without hitting the newly installed battery
and battery tray.
SPECIFICATIONS
Max Battery Size (mm) L300x W174 x H220
Max Battery Weight 23Kg
Recommended batteries Exide LCS 27-97 & Century N70TMF
Approximate fitting time 1 hour
Special tools None required
Recommended Dual P/n: IDC25, DBC100 (can use DBC150), VSR100 (can use VSR200)
Battery System
Tray Location Engine Bay, Passenger side near firewall
KIT INCLUDES
Hardware
4 x M6 Nut
2 x M6 Bolt
5 x M6 Bolts counter sunk
1 x M6 Washer
1 x M6 Bolt Long
Special Top
Mount Right Angle
Bracket
Tray Support
Bracket
Tray
J Bolts
1. Make sure that the vehicle is stationary, the engine is switched off and cool.
Disconnect the negative battery terminal from the main battery.
2. Locate the area where the tray will be fitted.
3. Unclip wiring loom and bolt in supplied right angle bracket using 1 x M6 bolt
and nut. Hole created after unclipping loom clip.
3
FITTING INSTRUCTIONS

Termékspecifikációk

Márka: Projecta
Kategória: nincs kategorizálva
Modell: HDBT110

Szüksége van segítségre?

Ha segítségre van szüksége Projecta HDBT110, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek