Használati útmutató Pyle PACGAMP77

Pyle Vevő PACGAMP77

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Pyle PACGAMP77 (2 oldal) a Vevő kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 5.5 felhasználó értékelte átlagosan 4.4 csillagra

Oldal 1/2
15 Watt Acoustic Guitar Amplifier
8'' Speaker with Volume, Bass, Treble, Gain,
Drive Switch and Digital Reverb Controls
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Before going any further, make sure that your amplier is compatible
with your mains electricity supply.
1. Ensure that the (power) switch is set to the position.MAINS OFF
2. Connect the supplied mains (power) lead into the mains electricity supply.
3. Ensure that the VOLUME controls are set to zero.
4. Plug your guitar into an jack socket.INPUT
5. Turn the front panel switch to the position.MAINS ON
6. Turn the VOLUME up to your preferred level and your amplier is ready to play.
Function
1. INPUT: Input for your guitar. Use a good quality guitar cable (i.e. one thats
screened/shielded) to help prevent noise, interference and unwanted feedback.
2. VOLUME: This is the overall level control for the normal channel.
3. Increasing the Treble will make your sounds brighter and more cutting, TREBLE:
turning it down will decrease your tones edge and make it sound softer as a result.
4. Adjusts the sound level of middle-frequency range.MIDDLE:
5. Adjusts the sound level of the low-frequency range.BASS:
6. CHORUS CONTROL: Rotating this control clockwise increases the modulation
rate of the chorus eect.
7. Connect headphones to this jack.PHONES:
8. The power switch turns your amplier on and o.POWER:
*No sound is played through the unit s speaker while the PHONES jack is in use.
www.PyleUSA.com
8
12 3 54 6 7

Termékspecifikációk

Márka: Pyle
Kategória: Vevő
Modell: PACGAMP77

Szüksége van segítségre?

Ha segítségre van szüksége Pyle PACGAMP77, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek