Használati útmutató Pyle PCJD50

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Pyle PCJD50 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 16 ember találta hasznosnak és 8 felhasználó értékelte átlagosan 4.7 csillagra

PCJD50

Hybrid Acoustic/Electronic Cajon

Stringed Cajon with Built-in Pickup Connector,

Internal Guitar Snare Strings

www.PyleUSA.com

1

2

3

4

1. 6.35 mono pickup output socket, the socket Nail Socket:

with the power switch, the power will be supplied auto

matically when the connector plug is inserted, the power

will automatically power’s OFF when unplugged.

2. Condenser Pickup Microphone:The microphone comes

with 3M glue at the bottom, and paste it inside of the drum

(as the installation drawing)

3. 9V battery is packed in the built-in strong 3M Battery:

rubber battery pack, and paste on the bottom of the drum.

4. Volume adjustment knob:Paste on the side of the sound

hole of the drum

Pickup installation steps:

1. The bottom left corner of the back board of the drum has a 12mm hole for nail.

2. Attach the microphone to the back panel of the drum, the distance from the sound hole edge can be adjusted

according to the timbre requirement of each drum.

3. Attach the volume control knob to the back panel of the drum, the knob should be higher than sound hole edge, it's

more convenient for adjusting the volume, clockwise to increase the volume, counter-clockwise to reduce the volume.

4. 9V battery is packed in the battery pack, 3M adhesive Velcro is attached to the bottom of the drum, near the back

panel.

5. Install the tail nail socket on the back board of the drum. (as picture below)

6. Tie the extra thread with a sticky buckle, paste to the back board, avoid noise caused by vibration when playing.

Back side of cajon

Left side of cajon

Condencer Microphone

12mm Nail socket

9V Battery pack

Tapping side of cajon

Volume adjustment knob

Right side of cajon

Termékspecifikációk