Használati útmutató Pyle PDWR50B

Pyle hangszóró PDWR50B

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Pyle PDWR50B (2 oldal) a hangszóró kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 5.5 felhasználó értékelte átlagosan 5.0 csillagra

Oldal 1/2
www.PyleUSA.com
Featu
Installation
MOUNTING THE BRACKET MOUNTING
1. Remove the bracket knobs and the bracket
from the speaker.
2. Hold the bracket up to the mounting surface.
" " can be mounted either horizontallyPYLE
wire ts through the large, circular wire hole in
the bracket. Align the bracket to be square with
the surrounding. (Use a level for accuracy)
3. Mark the locations of the three shaped screw holes.
Use all of the holes.
4. Drill pilot holes into the mounting surface.
5. Gently pull the speaker wire through the wire hole
in the center of the mounting bracket.
Align the bracket so that the holes all line up.
6. Use your hardware to attach the bracket to the mounting surface.
Visit Our Website
SCAN
PyleUS
USER GUIDE
INDOOR/OUTDOOR
WEATHERPROOF SPEAKER SYSTEMS
Excellent for use on Boats Marinas, Decks,
Patios, Poolside, Outdoors, Etc.
Completely Water Proof
Each PDWR50B Features:
6 1/2” Aluminum Injection Cone Woofer
50 OZ. Magnet Structure
1”High Compliance Myiar Tweeter
Capacitor Crossover Network
Bass Reex Vent for added Bass Response
Heavy Duty ABS Constrution
Quick Connect/Disconnect Speaker
Terminals
Unique Spring Loaded Mounting System
Removable Rustproof Mesh Grills
Power: 250 Watts RMS/500 Watts Peak
Frequency Response: 30-22K HZ
Impedance: 4 Ohms
Dimensions.: 7.2”(W) x 11.6”(H) x 6.4”(D)

Termékspecifikációk

Márka: Pyle
Kategória: hangszóró
Modell: PDWR50B

Szüksége van segítségre?

Ha segítségre van szüksége Pyle PDWR50B, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek