Használati útmutató Pyle PLRGSW104BK

Pyle hangszóró PLRGSW104BK

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Pyle PLRGSW104BK (4 oldal) a hangszóró kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 5.5 felhasználó értékelte átlagosan 4.3 csillagra

Oldal 1/4
Features:
10'' Slim Waterproof Subwoofer
Completely Waterproof
For Marine or Car Use
Multi-Color RGB Lights and Remote Control
PP Cone with Rubber Edge
High-Powered Car Subwoofer
Lab Tested Pro Audio Woofer Performance
Massive Butyl Rubber Surround
High Strength Engineering Plastic Basket
Quick Connect Speaker Terminal
Compatible with Sealed Enclosure Speaker Box Audio Setup
Impressive Bass Response, Low-Resonance Frequency Output
Designed for Custom Audio Car, Truck, Mobile Vehicle Applications
Installation Guide
Screw down each of the four Phillips
head screws. The locking tabs will
swivel into place and secure the unit
to the rear surface of the drywall.
Put in the strips of adhesive to
secure the grille.
Replace the metal grille.
10'' Slim Waterproof Subwoofer
400 Watts at Dual 4-Ohms Car Audio Powered Subwoofer with Multi-Color RGB Lights
and Remote Control, PP Cone with Rubber Edge
PLRGSW104WT - PLRGSW104BK
www.PyleUSA.com
Connection Diagram
Cut the drywall.
Note: Always allow at least one-half
inch between a wall stud and the
speaker cutout or the locking tabs
will not be able to swivel into place.
Connect the speaker wires to the
speaker.

Termékspecifikációk

Márka: Pyle
Kategória: hangszóró
Modell: PLRGSW104BK

Szüksége van segítségre?

Ha segítségre van szüksége Pyle PLRGSW104BK, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek