Használati útmutató Pyle PSTNDW18
Pyle
nincs kategorizálva
PSTNDW18
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Pyle PSTNDW18 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/2

1/2” Sheet Rock
2”
2” x 4”
Vertical Support
www.PyleUSA.com
PSTNDW18
with Angle, Tilt, Rotation Adjustment (Pair)
Dual Universal Adjustable Wall Mount Speaker Bracket Stands
Installation Instructions:
Required Tools: socket or hand wrench, drill, drill bit, stud nder, pencil, level,
tape measure, (4) 3/8” x 4” lag bolts
Step #1: Remove brackets from box.
Step #2: Check for stud location with a stud nder and place speaker bracket in
desired location.
Step #3: Test that the bracket plate is level and mark the hole locations on the
wall using the holes from bracket backer plate as a template.
Step #4: Drill proper mounting hole (smaller than outer thread diameter of your lag bolts) through wall into
wood studs or concrete block. Hole depth should be properly drilled so that your lag bolt can go through the
sheet rock and 2” into the stud.
Step #5: Place speaker bracket on wall and install 3/8” lag bolts (recommended) in the upper location. Securing
tightly until the head of the lag bolt is rmly against the bracket. Repeat for bottom location.
Step #6: Before placing the speaker cabinet on the bracket, test installation by conrming the bracket will hold
the weight of your speaker. If desired, tilt the angle of the bracket downward to the desired angle and tighten
the bolts to lock in place.
Step #7: Place the speaker on the cabinet by inserting the vertical sleeve into the speaker cabinet’s internal
adapter. Be sure the speaker is secure before releasing it. Test installation with speaker in vertical and tilted
positions to be sure the bracket stays rmly against the wall.
90° (degrees) 30° (degrees)
At upright 90° position, you can
mount a 22” deep speaker cabinet.
At 30° tilt down position, you can
mount a 30” deep speaker cabinet.
Adjustable tilt feature allows you to mount a 30” speaker cabinet

www.PyleUSA.com
Features:
• Durable, Rugged & Reliable
• Safely Hangs Speakers on Flat Wall Surfaces
• Includes (2) Universal Speaker Bracket Wall Mounts
• Heavy-Duty Reinforced Solid Formed Steel
• Mounts Permanently and Securely in Most Environments
• Universal Standard 1-3/8'' Insert Fits Most Speaker Cabinets
• Added Solid-Steel Pin Serves as Safety-Stop
• Mounts up to a 30'' Speaker Cabinet Depth
• Includes Mounting Hardware (Screws & Anchors)
What's in the Box:
• (2) Wall Mount Speaker Brackets
• (2) Bags of 4 Screws, 4 Washers, and 4 Anchors
Technical Specs:
• Distance From Wall: 12.5'' -inches
• Base: 5.25" X 9.9" -inches
• Tilt Angle Adjustment: 90°-30°
• Swivel Angle Adjustment: ±30°
• Weight Capacity: 80 lbs.
• Construction Material: Steel
• Product Dimension (L x W x H):
13.39 x 5.32 x 9.84 inches
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
Termékspecifikációk
Márka: | Pyle |
Kategória: | nincs kategorizálva |
Modell: | PSTNDW18 |
Szüksége van segítségre?
Ha segítségre van szüksége Pyle PSTNDW18, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva Pyle
13 Január 2025
10 Január 2025
10 Január 2025
2 Január 2025
6 December 2024
6 December 2024
27 Szeptember 2024
26 Szeptember 2024
26 Szeptember 2024
25 Szeptember 2024
Útmutatók nincs kategorizálva
- nincs kategorizálva Lorex
- nincs kategorizálva Traeger
- nincs kategorizálva Colonial Elegance
- nincs kategorizálva Fito
- nincs kategorizálva EasyMaxx
- nincs kategorizálva Hombli
- nincs kategorizálva Alto
- nincs kategorizálva ETiger
- nincs kategorizálva Fluance
- nincs kategorizálva Mybeo
- nincs kategorizálva Durvet
- nincs kategorizálva Galcon
- nincs kategorizálva Piko
- nincs kategorizálva Festool
- nincs kategorizálva Lowepro
Legújabb útmutatók nincs kategorizálva
10 Április 2025
10 Április 2025
10 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025