Használati útmutató Raspberry Pi 7996945

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Raspberry Pi 7996945 (4 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 6.5 felhasználó értékelte átlagosan 4.4 csillagra

Oldal 1/4
eRA Connect2Pi Transceiver Dongle Quick Start Guide
Era Connect2Pi Quick Start Guide V1 1 Copyright LPRS 2014 1 |
P a g e
easyRadio Advanced Connect2Pi Dongle Quick Start
Instructions.
These instructions demonstrate the process to get up and running quickly using the connect2Pi radio module from
LPRS on a Raspberry Pi running Rasbian.
It should be possible that other flavours of linux/raspberryPi should be similar.
Step 1:
Plug the Connect2Pi module into either of the USB sockets on the Raspberry Pi
Note: Rasbian and most recent builds of RaspberryPi Distro’s have the FTDI drivers built in.
If yours does not, the easiest fix is to ‘sudo apt upgrade’ and get the latest distribution, otherwise follow this -get dist-
link:
http://www.ftdichip.com/Support/Documents/AppNotes/AN_220_FTDI_Drivers_Installation_Guide_for_Linux%20.
pdf
Step 2: Open up a terminal. At the Prompt type dmesg:
You should get a response containing something like:
Note the line: FTDI USB Serial Device converter now attached to ttyUSB0

Termékspecifikációk

Márka: Raspberry Pi
Kategória: nincs kategorizálva
Modell: 7996945

Szüksége van segítségre?

Ha segítségre van szüksége Raspberry Pi 7996945, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek