Használati útmutató RCF V-BR NX 45

Olvassa el alább 📖 a magyar nyelvű használati útmutatót RCF V-BR NX 45 (1 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 3 felhasználó értékelte átlagosan 4.6 csillagra

Oldal 1/1
OPERATING INSTRUCTIONS
ISTRUZIONI D’USO
10307621
VERTICAL BRACKET V-BR NX 45
For , slightly unscrew both knobs and tilt the temporary installations
speaker, then secure both knobs screwing them tightly.
WARNING: do not unscrew the knobs completely.
Per , svitare leggermente le due manopole e installazioni temporanee
inclinare il diffusore, quindi ri-avvitarle saldamente.
ATTENZIONE: non svitare completamente le manopole.
For , remove both knobs and permanent installations
with the accessory.
Per , rimuovere le manopole e sostituirle installazioni fisse
con le viti M10 e relative rondelle fornite in dotazione.
For , secure the speaker to the bracket permanent installations
screwing the 4 M8 supplied screws and washers into these holes.
Per , fissare il diffusore alla staffa utilizzando le 4 installazioni fisse
viti M8 e relative rondelle fornite in dotazione utlizzando questi fori.
ON PERMANENT INSTALLATIONS, THE USE OF A MEDIUM STRENGTH THREADLOCKER (LOCTITE 243 OR SIMILAR) IS RECOMMENDED ON THE SCREW THREADS.
NELLE INSTALLAZIONI FISSE, SI CONSIGLIA L’UTILIZZO DI FRENAFILETTI MEDIO (LOCTITE 243 O EQUIVALENTE) SUI FILETTI DELLE VITI.
For , secure the speaker to the bracket temporary installations
inserting the 4 supplied pins into these holes.
Per , fissare il diffusore alla staffa installazioni temporanee
inserendo in questi fori i 4 pin forniti in dotazione.

Termékspecifikációk

Márka: RCF
Kategória: nincs kategorizálva
Modell: V-BR NX 45

Szüksége van segítségre?

Ha segítségre van szüksége RCF V-BR NX 45, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek