Használati útmutató RIDGID KWIK-SPIN+

Olvassa el alább 📖 a magyar nyelvű használati útmutatót RIDGID KWIK-SPIN+ (3 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 17 ember találta hasznosnak és 9 felhasználó értékelte átlagosan 4.3 csillagra

KWIK-SPIN

+

™

Hand

Spinner Instructions

WARNING

Wear appropriate protective equipment

including safety glasses and leather

gloves. Drains may contain hazardous

chemicals or bacteria.

If you have any question concerning this

RIDGID

®

product:

• Contact your local RIDGID distributor.

• Visit RIDGID.com to find your local RIDGID

contact point.

•

Contact RIDGID Technical Services Depart-

ment at rtctechservices@emerson.com, or in

the U.S. and Canada call (800) 519-3456.

Figure 1 – KWIK-SPIN

+

™

Hand Spinner

Specifications

The KWIK-SPIN

+

™

Hand Spinner cleans

drain lines up to 1½" in diameter. It is not rec-

ommended for toilets. The cable is positively

retained in the drum to prevent cable pullout.

Before Use

Inspect KWIK-SPIN

+

™

Hand Spinner. Do not

use if damaged. Inspect the drain. Determine

if chemicals are present. Some chemicals

have specific health and handling consider-

ations that should be provided by the manu-

facturer. Confirm KWIK-SPIN

+

™

hand spinner

is appropriate for the job.

Drain Access

• Thread through crosshairs (Figure 2).

• Unscrew cleanout plug or remove trap

(Figure 3).

KWIK-SPIN

+

™

Hand Spinner

999-999-473-10,

REV. A.

Printed 7/17

EC43071

© 2017, RIDGID, Inc.

The Emerson logo and RIDGID logo are registered trademarks of Emerson Electric Co. or RIDGID, Inc. in the U.S. and other countries.

All other trademarks belong to their respective holders.

• Pop-up Drain: Remove lift rod and drain

plug (Figure 4).

• Bathtub overflow: Remove overflow plate

and internal mechanism (Figure 5).

Operating Instructions

1. Insert cable into drain. Position unit as close

to drain as possible. Squeeze trigger to

engage the AUTOFEED

®

mechanism.

2. Turning drum clock-

wise advances cable.

Counter-clockwise

re-tracts cable.

Cable can also be

rapidly advanced/

retracted by hand.

Advance cable until

you encounter the blockage (Figure 6).

3.

Work cable through blockage. DO NOT force

cable. Work cable back and forth 2-3 times.

4.

Retract cable (Figure 7). After flow is estab-

lished, if possible run water to clear debris

and clean cable (Figure 8

).

5.

Rinse cable and drum. Air dry before storage

to prevent rust

.

AUTOFEED

®

Mechanism

Cable

TriggerHandle

Crank

Drum

Figure 2Figure 3

Figure 4Figure 5

Figure 6

Figure 7Figure 8

KWIK-SPIN is a registered trademark of RIDGID, Inc. in the U.S.

Termékspecifikációk