Használati útmutató Rigol RM-1-DG1000Z

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Rigol RM-1-DG1000Z (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 21 ember találta hasznosnak és 9 felhasználó értékelte átlagosan 4.2 csillagra

Installation GuideRIGOL

1

Rack Mount Kit

DG2000&DG1000Z&DSG800

This rack mount kit is designed to mount RIGOL DG2000/DG1000Z series

function/arbitrary waveform generator or DSG800 RF signal source into a 19-inch cabinet

that conforms to the Electronic Industries Association (EIA) standard. This manual takes

DG1000Z as an example to introduce the installation method.

Kit Part Checklist

No. Name

Qty.

Description

RM-1-DG1000Z

[1]

RM-2-DG1000Z

[1]

1 Front Plate 1 None --

2 Fastener 1 2 --

3 Connecting Plate A None 1 --

4 Connecting Plate B None 1 --

5 Retaining Bracket None 2 --

6

M4 Countersunk Flat

Head Screw

None 4

M4x10 Phillips Pan

Head Screw

7 M4 Pan Head Screw 4 8

M4x8 Phillips Pan

Head Screw

8 M6 Pan Head Screw 4 4

M6x16 Phillips Pan

Head Screw

9 M6 Nut 4 4

M6 Square Lock

Cage Nut

Note

[1]

:RM-1-DG1000Z is designed for installing a single instrument, and RM-2-DG1000Zfor two instruments.

2

3

4

5

6

7

8

9

1

6 7 8 9

Installation GuideRIGOL

2

Installation Tool

The PH2 Phillips screwdriver and T20 Phillips screwdriver are recommended.

Space Requirements

To mount the instrument into the cabinet correctly, please ensure that the following

requirements are met.

The cabinet must be a standard 19-inch one.

The available height of the cabinet should be at least 2U (88mm).

The depth of the cabinet should be at least 400mm.

The dimensions of the rack are as shown below.

RM-1-DG1000Z Unit: mm

RM-2-DG1000Z Unit: mm

Installation Procedures

CAUTION

Only authorized operators are allowed to perform the installation. Improper

installation might cause damage to the instrument or an installation failure.

Termékspecifikációk