Használati útmutató Rinnai Energysaver 1005FDT

Rinnai Fűtő Energysaver 1005FDT

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Rinnai Energysaver 1005FDT (32 oldal) a Fűtő kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 3 felhasználó értékelte átlagosan 4.7 csillagra

Letöltés PDF

Oldal 1/32

Energysaver Co-axial Flue System

Installation Manual

For Models:

RHFE-308FTR

RHFE-309FT / FT2

RHFE-556FTR / FDT

RHFE-557FTR

RHFE-559FT / FDT / FT2 / FDT2

RHFE-561FT / FT2

RHFE-1004FT / FDT

RHFE-1005FT / FDT / FT2 / FDT2

USE RINNAI GENUINE PARTSONLY

Rinnai 2 ES_FIM

IMPORTANT

Before proceeding with an installation read this manual thoroughly and gain a full understanding

of the installation requirements, to ensure a safe and correct installation.

The Rinnai Energysaver® Co-Axial ue is certied as part of the Rinnai Energysaver space

heaters that have the designation ‘RHFE’ in the model number.

ONLY the Rinnai ue system components specied in this manual MUST be used. Components

NOT specied in this manual, whether manufactured by Rinnai or otherwise, are NOT compatible

and MUST NOT be used!

Rinnai appliance warranty conditions may be voided if non Rinnai ue components are tted.

ONLY an authorised person install, service and remove the Rinnai Energysaver® space MUST

heater & ue system.

This appliance must be installed in accordance with:

• Manufacturer’s Installation Instructions

• Current AS/NZS 3000, AS/NZS 3500 & AS/NZS 5601

• Local Regulations and Municipal Building Codes

including local OH&S requirements

This appliance must be installed, maintained and removed

by an Authorised Person.

For continued safety of this appliance it must be installed

and maintained in accordance with the manufacturer’s

instructions.

Rinnai 3 ES_FIM

Warnings & Important Information 4

Before Using Installing Flue Components 4 ........................................................................................................................

Regulatory Information 4 .......................................................................................................................................................

Notice to Victorian Consumers 4 ......................................................................................................................................

Graphical Conventions Used In This Manual 5 ....................................................................................................................

Regulations & Clearances 6 ..................................................................................................................................................

Flue Transition Connections 7 ..............................................................................................................................................

Location 7 ................................................................................................................................................................................

Lubricating Components 7 ....................................................................................................................................................

Wall Penetrations 8 .................................................................................................................................................................

Installation Congurations ............................................................................................................................................... 10

Flue Kit Components 12 .........................................................................................................................................................

Installation methods 13

Direct Flue Installation Method 13 ........................................................................................................................................

Direct Extended Flue Installation Method 14 .......................................................................................................................

External Wall Flue Installation Method 15 ............................................................................................................................

Sideways Flue Installation Method 17 ..................................................................................................................................

Under Floor Flue Installation Method 19 ..............................................................................................................................

Cutting ~ ESDFK, ESPIPE900 & ESROOFCOWL 21 ............................................................................................................

Cutting components to achieve a desired length: 21 .....................................................................................................

Cutting components at a wall penetration: 21 ................................................................................................................

Component Assembly & Connection ~ ESPIPE900 21 .......................................................................................................

Component Assembly & Connection Wall Terminal ~ ESDFK & ESWTERM 22 ...............................................................

Component Assembly & Connection ~ ESBEND 22 ...........................................................................................................

Component Assembly & Connection ~ ESCONDK 23 ........................................................................................................

Component Assembly & Connection ~ ESROOFCOWL 23 ................................................................................................

Component Assembly & Connection "On-Wall" Terminal ~ ESWTKIT2 24 .......................................................................

Component Assembly & Connection "In-Wall" Flue ~ ESFKIT03 & ESKITIW .............................................................. 25

Connecting Heater Exhaust 28 ..............................................................................................................................................

Connecting Combustion Air Hose (Air Supply) 29 ..............................................................................................................

Connecting Condensate Drain Tube To Heater 30 ..............................................................................................................

Contacts 32