Használati útmutató Rinnai RI-522MM

Rinnai sütő RI-522MM

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Rinnai RI-522MM (2 oldal) a sütő kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/2
1
S P E C I F I C A T I O N
PREPARING THE UNIT FOR USE
Automatic Ignition (Piezo Magnetic)
(Figure No.1) (Figure No. 2)
15 cm 15 cm 100cm
15 cm
1. Top Plate
2. Small Burner Head
3. Small Hole Pan Support
4. Big Hole Pan Support
5. Simmer Burner Head
6. Big Burner Head
7. Ignition Knob
1. Check to ensure that all parts of the gas cooker are complete.
2. A minimum clearance is 15 cm from the side / back wall and 100 cm from
the ceiling is required when installing the gas cooker. The gas cooker shall
be placed in a good ventilated room. (Figure No. 1)
3. Using a screwdriver affix the rubber legs with the provided screw into the
designated hole on the gas cooker's bottom. (Figure No. 2)
4. Insert the ignition knob in its correct position by pushing it inward firmly.
(Figure No. 3)
5. Place the Simmer Burner Head onto the gas pipe located at the gas
cooker’s. (Figure No. 3)
6. Place the small hole pan support on the left burner and big hole pan
support on the right burner. (Only for RI-522M, RI-602M) (Figure No. 3)
7. Push the rubber hose on the gas pipe and regulator as far as it will go.
Secure the hose using a hose clamp.
8. Open the main valve on the gas cylinder. In the event of gas leak, close
the main valve immediately and open the windows in the room to allow
the gas to escape.
Safe and easy to operate, the burners will ignite automatically when the control knobs are pushed and turned in counter-clockwise
direction. For best results from your Rinnai Gas Cooker, Please read the instruction given below carefully prior to operating the unit.
(Figure No. 3)
Model
RI-522M
RI-511M
RI-522MM
RI-602M
RI-602MM
Dimension
Height Width Length
Net. Weight
Gas Consumption / h Gas Inlet
Connection
157 mm
157 mm
157 mm
157 mm
154 mm
700 mm
280 mm
378 mm
380 mm
4.2 Kg
2.3 Kg
LHS LHS
LPG (30 mbar/3.0 kPa) NG (25 mbar/2.5 kPa)
RHS RHSTotal Total
8.1 kW
4.8 kW
8.4 kW
4.9 kW
Rubber Hose
mmØ9.5
700 mm
702 mm
702 mm
378 mm
380 mm
380 mm
4.5 Kg
4.6 Kg
4.8 Kg
4.8 kW
3.3 kW
4.8 kW
3.3 kW
–
4.9 kW
3.5 kW
4.9 kW
3.5 kW
–
4.8 kW
4.8 kW
4.8 kW
4.8 kW
–
4.9 kW
4.9 kW
4.9 kW
4.9 kW
–
9.6 kW
8.1 kW
9.7 kW
9.8 kW
8.4 kW
9.8 kW
OPERATING INSTRUCTIONS GAS BURNER
NAME OF PARTS
MODEL:
RI-511M
RI-522M
RI-522MM
RI-602M
RI-602MM
080112
Pan Support
Ignition Knob
Simmer Burner Head
1
5 646
7
5
1
5 646
7
5
1
5 6
42
7
5 6
41
7
RI-511M
RI-522M RI-602M
RI-522MM RI-602MM
1
562
7
343
OPERATING THE UNIT MAINTENANCE AND CARE
ATTENTION
1. Igniting the burner and adjusting the flame.
*) Open the valve on the cylinder
2. If no flame, turn back the knob to “OFF" position, repeat the
ignition procedure as above.
3. Air Control
For good flame, turn Damper upward or downward until a blue-
colored flame is obtained. (Figure No. 6)
!RHS Burner (All model)
!LHS Burner (RI-522MM, RI-602MM)
Operate the burner with its double ring burner and “MAX”,
“Simmer” and “Minimum Simmer” flame selector as follow:
Maximum Flame
Push the knob in fully and turn counter clockwise to “MAX” in this
position both outer and inner burner will burn fully.
ØFlame is adjustable between the “MAX” and “OFF” position by
slowly turning the knob to the “OFF” position. (Figure No 5).
Simmer Flame
Turn the knob to the left on the “Simmer” direction the outer burner
will be switched off and only the smaller inner burner (simmer) will
function.
Minimum Simmer Flame
Turn the knob to left on the “Minimum Simmer”, Where the inner
burner will burn smaller.
!LHS Burner (RI-522M, RI-602M)
Maximum Flame
Push the knob in fully and turn it counter clockwise to “MAX”
position, where the burner will burn fully.
Minimum Flame
From “MAX” position turn the knob to the left on “MIN” position,
where the burner will burn smaller.
Ø Flame is adjustable between the “MAX” and “OFF” positions by
slowly turning the knob to the “OFF” position. (Figure No. 4)
1. Using a brush, to clean the Burner Head and Burner Top surface
of any dust adhering to these part.
2. Wipe clean the pan support, and other Stainless Steel Part with
a small amount of Soapy Water. Don't use the alcohol or
gasoline, because can damaged the part.
3. Clean the Electrodes as dust adhering to these parts may
prevent a good ignition. (Figure No. 7)
1. Keep away any flammable material / liquid from the gas cooker.
2. The gas cooker shall be placed in a good ventilated room.
3. Never use one single rubber hose for two gas cooker.
4. Do not place any objects that may easily be blown away by the
wind on the gas cooker.
5. In the event of gas leak, do not switch on any fan/ lighter.
6. Do not use any small cooking utensil that may cover the burner
flame and thereby extinguishing it.
7. Do not use any large cooking covering the entire gas cooker
surface.
8. Replace any damage / cracked rubber hose immediately.
9. Don't touch the gas cooker immediately after cooking.
10.Take care that no boiling water spills onto the gas burner's top
surface.
11.Do not use the gas cooker to dry.
12.Do not leave the gas cooker unattended when on.
13.Do not route the rubber hose under the gas cooker.
TROUBLE SHOOTING GUIDE
If trouble occurs, fix it referring to the above table. But if the problem still remain, or in case a serious malfunction, and if you are doubt,
then take the gas cooker to our AFTER SALES SERVICE for repairing without trying to repair it your self.
RI52-207-6x01
2
(Figure No. 5) (Figure No. 7) (Figure No. 4) (Figure No. 6)
* Push in fully
OFF
* Turn
Counter-clockwise
ON/MAX FLAME
MINIMUM
FLAME
* Push in fully
* Turn
Counter-clockwise
OFF
MAX FLAME
SIMMER
MINIMUM
SIMMER
MED FLAME
Flame does
not ignite
Main Gas Stopcock is not turned on.
Air remains in the gas piping.
Bend or crushed rubber tubing.
Piezo electrode or insular is dirty.
The gas cooker out of order.
Cracks or holes in the rubber tubing.
Rubber tubing is not connected properly.
Regulator leakage.
The gas cooker out of order.
Smell of gas
Turn off the gas cooker once and than turn it in fully.
Straighten it, or replace it.
Clean it with dry cloth.
Request to AFTER SALES SERVICE for repair.
Replace it with a new one.
Connect the rubber tubing properly.
Replace it with a new one.
Request to AFTER SALES SERVICE for repair.
Flame abnormal
Air supply is not properly adjusted.
The gas cooker out of order. Request to AFTER SALES SERVICE for repair.
Clean the clogged part.
Fix burner body properly.
TROUBLE CAUSE SOLUTION
Adjust is properly. (See Page 2 Fig.6)
Burner is not fitted properly.
Flame outlet of burner is clogged.
Repeat ignition operation until all air in the piping is purged out completely.

Termékspecifikációk

Márka: Rinnai
Kategória: sütő
Modell: RI-522MM

Szüksége van segítségre?

Ha segítségre van szüksége Rinnai RI-522MM, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók sütő Rinnai

Rinnai

Rinnai RB-72G Útmutató

18 Augusztus 2024
Rinnai

Rinnai RB-72S Útmutató

18 Augusztus 2024
Rinnai

Rinnai RB-93TG Útmutató

18 Augusztus 2024
Rinnai

Rinnai RB-92G Útmutató

18 Augusztus 2024
Rinnai

Rinnai RB-93UG Útmutató

17 Augusztus 2024
Rinnai

Rinnai RO-E6208TA-EM Útmutató

17 Augusztus 2024
Rinnai

Rinnai RI-522MM Útmutató

17 Augusztus 2024
Rinnai

Rinnai RB-93TS Útmutató

17 Augusztus 2024
Rinnai

Rinnai RO-E6206XA-EM Útmutató

17 Augusztus 2024
Rinnai

Rinnai RB-73TG Útmutató

16 Augusztus 2024

Útmutatók sütő

Legújabb útmutatók sütő

Whirlpool

Whirlpool akp 234 na 02 Útmutató

10 Április 2025
Candy

Candy FCP405X Útmutató

10 Április 2025
Premiere

Premiere EBC 23558 E Útmutató

10 Április 2025
Gram

Gram KKI 8544-90 T Útmutató

10 Április 2025
KitchenAid

KitchenAid KHDD2 38510 Útmutató

10 Április 2025
Stoves

Stoves Richmond 1000DFT Útmutató

10 Április 2025
Küppersbusch

Küppersbusch EEH615.0 Útmutató

10 Április 2025
Ariston

Ariston FM 51 Útmutató

10 Április 2025
Siemens

Siemens HB23A1520S Útmutató

9 Április 2025
Whirlpool

Whirlpool akp 237 Útmutató

9 Április 2025