Használati útmutató Rinnai SP5 Series RSP521EN

Rinnai Fűtő SP5 Series RSP521EN

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Rinnai SP5 Series RSP521EN (36 oldal) a Fűtő kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 5 felhasználó értékelte átlagosan 3.8 csillagra

Letöltés PDF

Oldal 1/36

Ducted Gas Heater

Operation Manual

Models:

SP6, SP5, SP4

BX5

SP623EN

SP521IN

Rinnai 2 Ducted Gas Heater OM

This appliance must be installed in accordance with:

• Manufacturer’s Installation Instructions

• Current AS/NZS 3000, AS/NZS 5601, AS/NZS 5141

• AS 4254, HB 276-2004

• Local Regulations and Municipal Building Codes

including local OH&S requirements

This appliance must be installed, maintained and removed

only by an Authorised Person.

For continued safety of this appliance it must be installed

and maintained in accordance with the manufacturer’s

instructions.

Proudly a member of the A.G.A.

All of our gas products are

A.G.A. certified.

Rinnai 3 Ducted Gas Heater OM

Table of Contents

Warnings and Important Information 5

1.1 How Does Ducted Heating Work? .................................................................................................................. 7

1.2 Efficiency ......................................................................................................................................................... 7

1.3 Safety Warnings .............................................................................................................................................. 8

1.4 Supply Cord .................................................................................................................................................... 8

1.5 Notes on Heater Operation ............................................................................................................................. 8

1.6 Power Supply Interruption ............................................................................................................................... 8

1.7 Switch the System On ..................................................................................................................................... 8

2. Outlet Guide 9

3. Networker Wall Control Unit 11

4. Zoned Systems 12

4.1 Zoning Symbols ............................................................................................................................................ 12

5. Time and Day Settings 12

5.1 Set Time and Day ......................................................................................................................................... 12

6. User Settings 13

6.1 NC-6 User Settings in Heating Operation Display ........................................................................................ 13

7. Programmed (AUTO) Operation 14

7.1 Operate the System in AUTO Mode ............................................................................................................. 14

7.2 Temporarily Override the AUTO Mode Settings ........................................................................................... 14

7.3 Skip a Programmed Heating Period ............................................................................................................. 15

7.4 Permanently Change the AUTO Mode Settings ........................................................................................... 15

8. Manual Operation 16

8.1 Operate the System with Manual Settings .................................................................................................... 16

9. Special Fan Operations 17

9.1 Fan Only Operation ....................................................................................................................................... 17

9.2 Continuous Fan Operation – Networker On ................................................................................................. 17

10. System Messages 17

10.1 Read Messages ............................................................................................................................................ 17

10.2 Clear the Spanner Icon ................................................................................................................................. 17

11. Error Codes 18

12. Reset the Heater 19