Használati útmutató Roland TR-8

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Roland TR-8 (5 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 19 ember találta hasznosnak.

/ 5 PDF

1

Contents of Ver. 1.50

Playing the SP-404A (or SP-404SX) from the TR-8

If you connect the TR-8 via MIDI to the SP-404A or SP-404SX

(subsequently called the “SP”), you can use operations on the TR-8 to

trigger sounds on the SP.

The order in which the TR-8’s INST select buttons are arranged ([BD],

[SD], ... , [RC] button) corresponds to the SP’s pads [1]–[11].

MEMO

It’s not possible to trigger the SP’s pad [12] from the TR-8.

1. Use a MIDI cable to connect the TR-8’s MIDI OUT connector

to the SP’s MIDI IN connector.

2. SP While holding down the [SHIFT] button (or [FUNC]

button), press pad [9] (MIDI CH).

3. SP Turn the [CTRL 3] knob to set the MIDI channel to “1.”

4. SP Press the [REC] button.

The SP’s MIDI channel (Pad Base Ch.) is set to “1.”

MEMO

MIDI channels 1 and 2 are used to trigger the SP from the TR-8.

In order to trigger the SP correctly, set the TR-8’s MIDI channel

(the MIDI channel used to trigger the TR-8’s internal sounds) to

something other than 1 or 2 (default: channel 10).

5. SP While holding down the [SHIFT] button (or [FUNC]

button), press pad [10] (MIDI SYNC).

6. SP Turn the [CTRL 3] knob to set the MIDI

synchronization mode to “tnP” (Tempo Sync) or “oFF” (Sync

OFF).

7. SP Press the [REC] button.

The SP’s MIDI synchronization mode is set to “tnP” (Tempo Sync) or

“oFF” (Sync OFF).

8. TR-8 Turn on the power, and press the DRUM SELECT

[INST] button.

9. TR-8 Press pad [16] to select which sound module is

played when you press the [BD]–[RC] buttons.

The color changes each time you press pad [16].

Pad [16]

status Sound module that is played

Lit whiteThe TR-8’s internal sounds are played.

Blinking

yellow

The TR-8’s internal sounds and the SP’s sounds are played

simultaneously.

Blinking

blue The SP’s internal sounds are played.

MEMO

When the pad [16] color is yellow or blue, you can turn the

[TEMPO] knob to select the sample bank (or pattern bank) that is

played by the SP.

Support for USB Audio Sample Rates 44.1/48/96 kHz

Windows users

1. Access the control panel as follows.

1. Click the [Start] button.

2. Click the [TR-8] icon.

The control panel appears.

2. From the SAMPLE RATE parameter, select the sample rate.

Copyright © 2014 ROLAND CORPORATION

04

TR-8 Update

Termékspecifikációk