Használati útmutató Roland UA-4FX2

Roland nincs kategorizálva UA-4FX2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Roland UA-4FX2 (18 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 13 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/18
1
Owner’s Manual
UA-4FX2
Before using this unit, carefully read “USING THE UNIT SAFELY” (p. 16) and “IMPORTANT NOTES” (p. 17). After reading, keep the document(s) where it will
be available for immediate reference.
Copyright © 2017 ROLAND CORPORATION
Contents of the Package
5UA-4FX2
5Owner’s Manual (this document)
5USB cable
Installing the Driver
* Do not use a micro USB cable that is designed only for charging a device. Charge-only cables cannot transmit data.
Windows 10 Users
1. Use the included USB cable to connect the UA-4FX2 to your computer.
The driver is installed automatically.
Windows 7 or Windows 8.1 Users
NOTE
Don’t connect the UA-4FX2 to your computer before installing the driver.
If you’ve already connected the UA-4FX2, temporarily disconnect it.
When the screen indicates “Ready to install the driver. ---,” connect the UA-4FX2.
1. Start up Windows with all USB cables disconnected other than the cables of your keyboard and mouse.
2. Download the driver from the following URL.
&
http://roland.cm/ua4fx2
3. Before you begin installation, close all applications.
4. Unpack the downloaded Zip le, and double-click “Setup.”
5. If a user account control conrmation screen appears, click [Yes].
6. In the dialog box that indicates “UA-4FX2 Driver will be installed on your computer. ---,” click [Next].
* If any other message appears, proceed as directed by the message.
7. To begin installation, click [Next].
8. If a Windows security dialog box appears, click [Install].
9. Note the dialog box that indicates “Ready to install the driver. ---”
* If any other message appears, proceed as directed by the message.
10. Use the included USB cable to connect the UA-4FX2 to your computer.
The driver is installed automatically.
11. In the dialog box that indicates “Installation has been completed.”, click [Close].
12. If the “System Settings Change” dialog box appears, click [Yes] and restart Windows.
2
Mac Users
NOTE
Don’t connect the UA-4FX2 to your computer before installing the driver.
If you’ve already connected the UA-4FX2, temporarily disconnect it.
Connect the UA-4FX2 after driver installation is completed.
1.
Start up your Mac with all USB cables disconnected other than the cables of your keyboard and mouse.
2.
Download the driver from the following URL.
&
http://roland.cm/ua4fx2
3.
Before you begin installation, close all applications.
4.
Unpack the downloaded le, and double-click “UA4FX2_USBDriver.”
5.
In the dialog box that says “This package checks whether the software can be installed. ---” click [Continue].
* If any other message appears, proceed as directed by the message.
6.
In the dialog box “Welcome to the UA-4FX2 Driver Installer,” click [Continue].
7.
To begin installation, click [Install].
* If any other message appears, proceed as directed by the message.
8.
When the installation is completed, click [Restart] to restart your computer.
9.
Use the included USB cable to connect the UA-4FX2 to your Mac.
Checking That You Hear Sound
1.
Connect headphones or amplied speakers.
Windows Users
2.
Open “Control Panel,” click [Hardware and Sound], and then click [Sound].
If the “View” is [Large Icons] or [Small Icons], double-click [Sound].
3.
Click the [Playback] tab, click the UA-4FX2’s [OUT], and then click the [Set Default] button.
4.
Right-click the UA-4FX2’s “OUT,” and click [Test] to verify that you hear sound.
5.
Click [OK].
Mac Users
2.
Open “System Preferences,” and click the [Sound] icon.
3.
Click the [Output] tab, and click [UA-4FX2].
4.
Click the [Sound Eects] tab, and click the [Output Volume] slider to check the sound.
5.
Close “System Preferences.”
3
Panel Descriptions
Left side
MIC/GUITAR jack
Connect a mic or guitar here. Use the [MIC/GUITAR] knob
to adjust the volume.
Phantom power is not supplied.
MIC jack (XLR type)
This is an analog audio input jack that provides a mic
preamp. Both balanced and unbalanced connections are
supported.
Condenser mic Turn the [PHANTOM] switch on.
Input rating: -50– -18 dBu
Dynamic mic The [PHANTOM] switch must be o.
Input rating: -56– -24 dBu
* Pin assignment of MIC jack (XLR type)
1: GND
2: HOT
3: COLD
PHONES/HEADSET jack
Connect headphones or earphones (headsets) that are
compatible with four-conductor mic inputs.
Use the [MIC/GUITAR] knob to adjust the mic volume of
the headset.
LINE IN jack
The audio signal from an audio device or MIDI sound
module can be input here. Use a stereo mini-type cable to
make this connection.
Use the [LINE IN] knob to adjust the volume of the audio
signal.
Right side
[PHANTOM] switch
This turns on/o the phantom power that is supplied to
the MIC jack (XLR type).
You must leave this switch turned o unless a condenser
mic that requires phantom power is connected. Supplying
phantom power to a dynamic mic or an audio playback
device will cause malfunctions.
For details on the specications of your mic, refer to the
owner’s manual of your mic.
(The UA-4FX2’s phantom power supply: DC48 V, 6 mA Max)
[MIC/GUITAR] switch
Set this to “MIC” if you’re using a mic, or to “GUITAR” if
you’re using a guitar.
* Before changing the setting of this switch, minimize the
volume of the connected device.
USB port
Use the included USB cable to connect this to your
computer so that audio signals can be sent and received.

Termékspecifikációk

Márka: Roland
Kategória: nincs kategorizálva
Modell: UA-4FX2

Szüksége van segítségre?

Ha segítségre van szüksége Roland UA-4FX2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók nincs kategorizálva Roland

Roland

Roland MDS-50K Útmutató

3 Április 2025
Roland

Roland CB-76RL Útmutató

3 Április 2025
Roland

Roland OP-RMP12 Útmutató

3 Április 2025
Roland

Roland RH-L20 Útmutató

3 Április 2025
Roland

Roland M-UF1G Útmutató

3 Április 2025
Roland

Roland CB-88RL Útmutató

3 Április 2025
Roland

Roland 7X7-TR8 Útmutató

3 Április 2025
Roland

Roland CB-CS1 Útmutató

2 Április 2025
Roland

Roland CB-MCC1 Útmutató

2 Április 2025
Roland

Roland CB-HPD Útmutató

2 Április 2025

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
Soundstream

Soundstream VRN-64HBL Útmutató

10 Április 2025
Panasonic

Panasonic Lumix DMW-AC11 Útmutató

10 Április 2025
Planet

Planet PWR-240-48 Útmutató

9 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
Alpine

Alpine DP2-40C-BC Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025