Használati útmutató Rolls SX95

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Rolls SX95 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 21 ember találta hasznosnak és 9 felhasználó értékelte átlagosan 4.5 csillagra

SX95 Stereo Sub woofer Filter

Connection guide

Rolls Corporation

Salt Lake City, UT

9/18

Made in USA

ww.rolls.com

What's in the box?

1 - Made in USA SX95

1 - 15V power supply PN PS27s

1 - This owners manual

Made in USA

ww.rolls.com

SPECIFICATIONS:

Input Impedance: 10K Ohm

Output Impedance: 1K Ohm

Headroom: +10 dBV

Power Requirements: 12 - 15 VDC, 500 mA;

Rolls part number PS27s

Size: 4” x 4.5” x 1.5”

Weight: 1 lb.

• 12 dB/Octave roll o

• Stereo RCA Input and Outputs

• 36Hz to 200 Hz crossover range

• Mono or Stereo Sub Output

Connect the SX95 to the output of

a preamplier, mixer or other device

containing a stereo signal. This sig-

nal should be Line-Level, or refer-

ence 0 to +4 dB.

Set your ampliers to their normal

operating level (many ampliers are

simply set at their full volume level).

Carefully begin increasing the SX95

Level control until you reach a de-

sired volume level.

Adjust the Sub Frequency to the de-

sired level for your sub woofers. We

recommend selecting the 0 degrees

phase setting on both channels to

start, then make your adjustments

later as needed.

The Rolls SX95 is a true stereo sub

woofer crossover. It also features a mono

or stereo selection switch to utilize the

SX95 in mono. The SX95 features a true

pass thru output that will allow proper

connection to your system without any al-

terations to the original signal. The SX95

is a perfect way to separate low frequen-

cies from line level program material in

any system, home, professional or an

installation. With a frequency range of

36Hz to 200Hz, and an external power

supply for noise reduction the SX95 will

allow you to have complete control of you

subs.

CONNECTION:

DESCRIPTION:

Termékspecifikációk