Használati útmutató Rotel RFK-26

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Rotel RFK-26 (4 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 16 ember találta hasznosnak és 7 felhasználó értékelte átlagosan 4.1 csillagra

INSTRUCTIONS

RFK-20 (20” RACK FRAME KIT)

RFK-26 (26” RACK FRAME KIT)

20" Rack Frame Kit List 26" Rack Frame Kit List

Rack Frame (A) 20inch 5 set (10 rails) Rack Frame (B) 26inch 5 set (10 rails)

Fixing Angle 5 set (10 pcs) Fixing Angle 5 set (10 pcs)

Screw (4x6mm) 5 set (20 pcs) Screw (4x6mm) 5 set (20 pcs)

1U COVER 10 pcs 1U COVER 10 pcs

2U-L COVER 5 pcs 2U-L COVER 5 pcs

2U-R COVER 5 pcs 2U-R COVER 5 pcs

3U-L COVER 5 pcs 3U-L COVER 5 pcs

3U-R COVER 5 pcs 3U-R COVER 5 pcs

4U-L COVER 1 pc 4U-L COVER 1 pc

4U-R COVER 1 pc 4U-R COVER 1 pc

Instruction sheet 1 Instruction sheet 1

* Frame fixing screws are not included in the kit * Frame fixing screws are not included in the kit

This Rack Frame Kit is for ROTEL 15 Series components only.

Please see back page

STEP 1: (Drawing 1)

Attach the rack rails to the left and right sides using a screw with 10-32 thread. (Not

included in the kit)

STEP 2: (Drawing 2)

Remove the feet from ROTEL component. Slide the ROTEL component slowly in to

the rack until the lower edge of front panel touches the bottom of the rail. Do not try

and push the product beyond this point.

STEP 3: (Drawing 3)

Attach the “L” bracket to stop the component sliding back using the affixed screw (4

x6mm), then screw it to Rack Frame by using (4 x 6mm) screw.

STEP 4: (Drawing 4)

Finish off by fixing the correct cover plate using screw with 10-32 thread. (Not included

in the kit)

082 OMFRK20_26 MANUAL 081113

Termékspecifikációk