Használati útmutató Sanus ELM202

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Sanus ELM202 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 16 ember találta hasznosnak és 7 felhasználó értékelte átlagosan 4.3 csillagra

Sanus Systems

2221 Hwy 36 West

Saint Paul, MN 55113 USA

Customer Service

800-359-5520 • 651-484-7988 • info@sanus.com

sanus.com

©2010 Milestone AV Technologies, a Duchossois Group Company.

All rights reserved. Sanus is a division of Milestone.

All other brand names or marks are used for identification purposes and are trademarks of their respective owners.

ELM202 Surge Protector

(6901-100200 <02>)

Speci cations

2100 Joule surge suppression

EMI/RFI noise  ltration

Gold-plated coaxial input and outputs

UL Listed

UL Electrical Rating: 15A Max/125Vac/60Hz/1875W

Voltage Protection Rating: 400V(L-N) 500V(L-G) 400V(N-G)

Warranty

Your Sanus ELM202 Surge protector has a ve year product warranty

against manufacturer’s defects. If you have any questions or experience

any problems with your Sanus Elements Surge Protector, please contact

Sanus Systems Customer Service at 1-800-359-5520.

Both the “Ground” and “Surge” lights illuminate to

indicate that the surge protector is working. If

either light fails to illuminate, replace the surge

protector.

From wall phone outlet

To phone / fax modem

From wall, DSS, cable, or other coaxial output

To TV, VCR, or other coaxial input

GROUND

SURGE

OUTINOUTIN

IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL BEFORE USING THIS PRODUCT

CAUTION:

Avoid potential personal injury or property damage!

Do not disassemble the surge protector. Disassembling will void the

warranty and may cause serious personal injury.

Disconnect the surge protector during lightning storms.

To Reduce the Risk of Electric Shock - Use Only in Dry Locations Indoors!

Risk of Electrical Shock. Do not plug into another relocatable power tap.

This device features an internal protection that will disconnect the surge

protective component at the end of its useful life but will maintain power

to the load - now unprotected. If this situation is undesirable for the

application, follow the manufacturer’s instructions for replacing the device.

Do not install this device if there is not at least 10 meters (30 feet) or more

of wire between the electrical outlet and the electrical service panel.

The input plug of this power tap is intended to serve as the disconnect

device, it shall be easily accessible and withdrawn.

Do not use this product for any purpose not explicitly specied by Sanus

Systems.

If you do not understand these instructions, or have doubts about the

safety of the installation, assembly or use of this product, contact Sanus

Systems Customer Service or call a qualied contractor.

Sanus Systems is not responsible for damage or injury caused by incorrect

assembly or use.

Termékspecifikációk