Használati útmutató Sanus VMCA1

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Sanus VMCA1 (1 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/1
Assembly Instructions for Model: VMCA1b-01
Thank you for choosing a Sanus Systems VisionMount™ accessory. The Ceiling Plate is designed for ease of installation
with any height of drop ceiling. By using any length of standard NPT 1½” pipe threaded both ends, you can extend the height
capabilities to meet your needs.
WARNING: If you do not understand these directions, or have any doubts about the safety of the installation, please
contact Sanus at 800.359.5520 or www.sanus.com. Check carefully to make sure that there are no missing or defective
parts. Our customer service representatives can quickly assist you with installation questions and missing or damaged
parts. Replacement parts for products purchased through authorized dealers will be shipped directly to you. Never use
defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that
is not explicitly specied by Sanus Systems. Sanus Systems can not be liable for damage or injury caused by incorrect
assembly, or incorrect use. Please contact Sanus Systems before returning products to the point of purchase.
WARNING: Improper installation may result in serious personal injury. When mounting Sanus accessories, the
structural system and mounting method must be capable of supporting ve (5) times the combined weight of the
total installation. The maximum weight to be installed on the Ceiling Plate is 500 lbs. [226.8 Kg].
Parts List:
(1) 4” Flat Ceiling Plate CMA-101 (1) 5/16-18 x 3/8” Security Set Screw Socket Set Screw,
(1) 5/16-18 x 3/8” Socket Set Screw (1) 5/32” Hex Wrench
1. Securely install the ceiling plate to the ceiling joist. Bolt hole spacing is shown in Diagram 1. If using only two holes for
mounting, you must use opposing holes.
2. Thread your NPT1-1/2” pipe into the coupler; then, tighten securely.
3. Install and securely tighten the 5/16-18 x 3/8” Socket Set Screw or, if desired, the Security Set Screw.
4. Follow the Ceiling Mount Instruction mating components or mounts.
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 (6901-100144<00>)
Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com
Diagram 1
2.00”
4.00”
5.00”
2.00”
4.00”
5.00”
0.69”
1-1/2” NPS
Opposing Holes

Termékspecifikációk

Márka: Sanus
Kategória: nincs kategorizálva
Modell: VMCA1

Szüksége van segítségre?

Ha segítségre van szüksége Sanus VMCA1, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Sanus

Sanus

Sanus CFR518DP Útmutató

2 Április 2025
Sanus

Sanus CFR518RR Útmutató

2 Április 2025
Sanus

Sanus CK2 Útmutató

8 Január 2025
Sanus

Sanus VSF817 Útmutató

5 Január 2025
Sanus

Sanus VLF828 Útmutató

5 Január 2025
Sanus

Sanus LSF110 Útmutató

5 Január 2025
Sanus

Sanus FPA400 Útmutató

29 December 2024
Sanus

Sanus CFR2144 Útmutató

29 December 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025