Használati útmutató Satel AMD-103

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Satel AMD-103 (4 oldal) a Deur-/frame érzékelő kategóriában. Ezt az útmutatót 20 ember találta hasznosnak és 9 felhasználó értékelte átlagosan 5.0 csillagra

147

1

AMD-103

WIRELESS MAGNETIC CONTACT

amd103_en 05/15

The AMD-103 magnetic contact can detect opening of a door, window, etc. It is designed for

operation within the ABAX two-way wireless system. This manual applies to the detector with

firmware version 2.00, which is supported by:

ACU-120 / ACU-270 controller,

ACU-100 / ACU-250 controller with firmware version 4.03 2014-05-15 (or newer),

ARU-100 repeater with firmware version 2.00 2014-05-15 (or newer),

INTEGRA 128-WRL control panel with firmware version 1.12 2013-12-20 (or newer).

1. Features

LED indicator enabled in test mode.

Tamper protection in 2 ways – cover removal and tearing enclosure from the wall.

Battery status control.

2. Specifications

Operating frequency band...................................................................868.0 MHz ÷ 868.6 MHz

Radio communication range (in open area)............................................................up to 350 m

Battery.................................................................................................................CR2477N 3 V

Battery life expectancy...................................................................................... approx. 2 years

Standby current consumption...........................................................................................10 µA

Maximum current consumption........................................................................................14 mA

Environmental class according to EN50130-5.........................................................................II

Operating temperature range.............................................................................-10 °C...+55 °C

Maximum humidity..........................................................................................................93±3%

Detector enclosure dimensions........................................................................32 x 45 x 20 mm

Magnet enclosure dimensions.........................................................................11 x 45 x 10 mm

Weight.................................................................................................................................40 g

Hereby, SATEL sp. z o.o., declares that this detector is in compliance with the

essential requirements and other relevant provisions of Directive 1999/5/EC. The

declaration of conformity may be consulted at www.satel.eu/ce

3. Description

Opening the reed switch contacts after removal of magnet, or opening the tamper contact,

will trigger an alarm. Information on the alarm is sent by radio to the ACU-100 / ACU-250 /

ACU-120 / ACU-270 controller or to INTEGRA 128-WRL control panel. The detector always

remains in the active mode (all alarms are sent immediately).

Termékspecifikációk