Használati útmutató Seiko SQ50V

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Seiko SQ50V (1 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 14 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 5.0 csillagra

●Metronome Mode

•Set indicator of setting dial to desired tempo speed.

•Slide power switchto S1 or S2 to select desired

tempo sound.

●Reference Note Generation Mode

•Set indicator of setting dial to reference note mark .

•Slide power switch to A4 or B

♭4 to select desired

reference note.

* The reference note generation mode is useful for tuning

musical instruments.

Slide battery hatch in direction of arrow in the illustration,

and remove it.

Connect dry battery with battery plug, checking that (+) and

(-) terminals are correctly connected.

* Be sure to use a specied 9V dry battery (6F22) only.

* Before changing battery, check that metronome is turned off.

* When battery nears its end, the metronome may not work properly.

Replace the battery with a new one immediately.

* The battery included with your metronome when it was purchased

is a monitor battery, and may not last as long as specied.

* When disposing of old battery, observe the regulations of

authorities concerned.

NAMES AND FUNCTIONS OF PARTS

HOW TO USE

HOW TO INSTALL THE BATTERY

Power switch

•Slide the switch to turn ON/OFF power.

•Changes over tempo sound between "S1" and "S2" in

metronome mode.

•Changes over reference note between "A4" and "B

♭4"

in

reference note generation mode.

Setting dial

Turn dial to set indicator to desired tempo speed or

reference note.

Reference note mark (A4/B

♭4)

Set setting dial to this mark to generate reference note.

LED tempo display

The red LED flashes to the tempo you have set.

Speaker

It gives out tempo sound and the reference note.

Volume dial

It adjusts volume of tempo sound and reference note.

Earphone jack

Insert earphone plug into it to use with earphone.

Prop-up stand

QUARTZ METRONOME

SQ50V

Termékspecifikációk