Használati útmutató Shadow SH091

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Shadow SH091 (1 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 16 ember találta hasznosnak és 8.5 felhasználó értékelte átlagosan 5.0 csillagra

Oldal 1/1
Fax: (561) 743 0460
eMail: jjmelch@shadow-pickups.com
Shadow Elektroakustik
Peter-Haendel Straße 2
91334 Hemhofen · Germany
Shadow Electronics of America Inc.
17791 Alexander Run
Jupiter, FL 33478 U.S.A.
Fax: +49 - 91 95 - 92 99 30
eMail: info@shadow-electronics.com
Installation Instruction for Shadow SH 091
Incorporated Saddle
Content:Content:
Incorporated Saddle with integrated piezo pickup
Note:
Piezo pickups and transducers have a very high output impedance. In order to get the optimum sound output we
recommend an amplier with low impedance input.
Note:
Piezo pickups and transducers have a very high output impedance. In order to get the optimum sound output we
recommend an amplier with low impedance input.
Fig. 1 Fig. 2
guitar strings
pickupr
saddle
guitar bridge
guitar strings
pickup
saddle
guitar bridge
1. Remove strings and original bridge saddle.
2. Center the pickup in the bridge slot with the output wire on the bass side.
3. Mark the position of the output wire and drill a 3/32” (2.3mm) hole.
4. It the pickup is lower or higher than the original saddle, shim wtih the included shims or route the bridge slot as needed.
5. Clean bridge slot completely and remove wood dust from inside instrument.
6. Feed the wire through the hole, place the pickup and make electrical connections as needed.
7. Reinstall the strings and retune the guitar. Make sure, the strings do not pull the pickup saddle forward in the slot (see
g. 1 and 2).
Wrong Correct

Termékspecifikációk

Márka: Shadow
Kategória: nincs kategorizálva
Modell: SH091

Szüksége van segítségre?

Ha segítségre van szüksége Shadow SH091, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek