Használati útmutató Sharp PN-ME432
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Sharp PN-ME432 (8 oldal) a képernyő kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 3.5 felhasználó értékelte átlagosan 3.7 csillagra
Oldal 1/8

User’s Manual
Large Format Display
MultiSync® ME982
MultiSync® ME862
MultiSync® ME752
MultiSync® ME652
MultiSync® ME552
MultiSync® ME502
MultiSync® ME432
MODEL:
PN-ME982, PN-ME862, PN-ME752, PN-ME652, PN-ME552, PN-ME502, PN-ME432
Please nd your model name on the label on the rear side of the monitor.

English−2
Table of Contents
DEAR CUSTOMER .............................................................. 2
Important Information ........................................................3
Safety Precautions and Maintenance ............................ 5
Recommended Use & Maintenance ............................ 11
Trademark and Software License ................................12
Supplied Components .....................................................13
Part Names ........................................................................14
Connecting Peripheral Equipment ..................................16
Connecting the Supplied Power Cord ............................ 18
Mounting (for Customer) .................................................18
Preparing the Remote Control ........................................19
Turning Power On/Off ......................................................20
Power ON and OFF .....................................................20
Using Power Management ..........................................21
Basic Operation ................................................................ 22
Menu Screen .....................................................................25
About the home screen................................................25
Application - File Explorer ............................................... 27
Application - Web Browser .............................................. 29
Application - Updater .......................................................30
Application - MediaPlayer ................................................31
Advanced Operation ........................................................36
Creating a Power and Reboot Schedule .....................36
Setting Security and Locking the Monitor Controls ......37
Setting the Remote Control ID Function ...................... 41
Connecting Multiple Monitors ......................................42
External Control ................................................................43
Controlling the Monitor via RS-232C ...........................43
Controlling the Monitor via LAN ...................................44
Commands ..................................................................47
Proof of Play ................................................................47
Troubleshooting ...............................................................48
Screen Image and Video Signal Issues .......................48
Hardware Issues ..........................................................49
Specications ...................................................................51
Compatible signal list ...................................................51
Product Specications .................................................52
Appendix-A External Resources ..................................... 54
Appendix-B Common Settings Menu List ......................56
Picture..........................................................................56
Audio............................................................................58
Appendix-C Administrator Settings Menu List .............. 59
Input & Output..............................................................59
Schedule ......................................................................61
Network........................................................................61
Protect .........................................................................64
Setup ...........................................................................65
Application ...................................................................66
System .........................................................................67
About ...........................................................................68
Mounting Precautions
(For SHARP dealers and service engineers) .................69
Mounting (for Trained Installers) ..................................69
Manufacturer’s Recycling and Energy Information ......74
Energy Saving .............................................................74
Addition explanation to EcoDesign Regulation ............74
DEAR CUSTOMER
Thank you for your purchase of a product. To ensure safety and many years of trouble-free operation of your
product, please read the “Important Information” carefully before using this product.
Mounting the monitor requires expertise and the work must be carefully performed by a trained service person in
accordance with the section “Mounting Precautions (For SHARP dealers and service engineers)”.
NOTE:
• Product warranty does not cover damage caused by improper installation. Failure to follow these
recommendations could result in voiding the warranty.

English−3
Important Information
To maintain compliance with EMC regulations, use shielded cables to connect to the following terminals: USB port, USB
Type C port and Audio output terminal. Use shielded cables with ferrite core to connect to the following terminals: HDMI input
terminal, RS-232C input terminal.
Supplier’s Declaration of Conformity
SHARP LCD MONITOR, PN-ME982/PN-ME862/PN-ME752/PN-ME652/PN-ME552/PN-ME502/PN-ME432
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Responsible Party:
SHARP ELECTRONICS CORPORATION
100 Paragon Drive, Montvale, NJ 07645
TEL: (630) 467-3000 www.sharpusa.com
U.S.A. ONLY
WARNING:
FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the
manufacturer could void the user’s authority to operate this equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
U.S.A. ONLY
WARNING:
An apparatus with CLASS I construction shall be connected to a MAIN socket outlet with a protective earthing connection.
(For Customers in U.K.)
IMPORTANT
• The wires in this mains lead are coloured in accordance with the following code:
GREEN-AND-YELLOW: “Earth”
BLUE: “Neutral”
BROWN: “Live”
• As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug
proceed as follows:
• The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety
earth symbol or coloured green or green-and-yellow.
• The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured black.
• The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured red.
• Ensure that your equipment is connected correctly. If you are in any doubt consult a qualied electrician.
“WARNING: THIS APPARATUS MUST BE EARTHED.”
Termékspecifikációk
Márka: | Sharp |
Kategória: | képernyő |
Modell: | PN-ME432 |
Termék színe: | Fekete |
Csomagolás tömege: | 14200 g |
Csomagolás mélysége: | 156 mm |
Csomagolás magassága: | 632 mm |
Csomagolás szélessége: | 1056 mm |
Wi-Fi: | Nincs |
Cél: | Kereskedelmi |
Képernyő méret: | 43 " |
Érintőképernyő: | Nincs |
LED háttérvilágítás: | Igen |
Képernyőfelbontás: | 3840 x 2160 pixelek |
Fényerő: | 400 cd/m² |
HD típusa: | 4K Ultra HD |
Támogatott elhelyezés: | Beltéri |
Áramfogyasztás (tipikus): | 90 W |
USB-csatlakozók száma: | 4 |
Ethernet LAN (RJ-45) portok: | 1 |
Fejhallgató kimenetek: | 1 |
Fejhallgató csatlakozhatóság: | 3,5 mm-es |
Ethernet/LAN csatlakozás: | Igen |
Áramfogyasztás (készenlét): | 0.5 W |
Tárolási hőmérséklettartomány (T-T): | -20 - 60 °C |
Relatív üzemi páratartalom-tartomány: | 20 - 80 % |
Tárolási relatív páratartalmi tartomány: | 10 - 80 % |
HDR támogatás: | Igen |
Panel típusa: | ADS |
Pixeltávolság: | 0.25 x 0.25 mm |
Kontrasztarány (általános): | 1200:1 |
Vízszintes látószög: | 178 ° |
Függőleges látószög: | 178 ° |
Válaszidő: | 8 ms |
Vízszintes letapogatási frekvencia: | 30 - 135 kHz |
Függőleges letapogatási frekvencia: | 23 - 76 Hz |
Alap képméretarány: | 16:9 |
HDMI portok mennyisége: | 3 |
HDMI-verzió: | 2.0 |
USB port: | Igen |
HDCP: | Igen |
Kijelző szélessége: | 964.6 mm |
Kijelző magassága: | 552.5 mm |
Kijelző mélysége: | 62 mm |
VESA szerelés: | Igen |
Panelrögzítő interfész: | 200 x 200 mm |
Képernyő formája: | Lapos |
Termék dizájn: | Laposképernyős digitális reklámtábla |
Tájolás: | Vízszintes / függőleges |
Telepített operációs rendszer: | Android |
Beépített hangszóró(k): | Igen |
USB 2.0 portok száma: | 1 |
USB-csatlakozó típusa: | USB Type-A, USB Type-C |
USB 3.2 Gen 1 (3.1 Gen 1) A típusú portok száma: | 2 |
USB 3.2 Gen 1 (3.1 Gen 1) C típusú portok száma: | 1 |
Ethernet LAN adatátviteli sebességek: | 10,100,1000 Mbit/s |
Kijelző felület (sz x ma): | 941.18 x 529.42 mm |
DVI-port: | Nincs |
Számítógépes rendszer: | Igen |
Teljesítményfelvétel (max.): | 175 W |
Az operációs rendszer verziója: | 13 |
USB C típusú DisplayPort alternatív mód: | Igen |
Kijelző színeinek száma: | 1,07 milliárd szín |
Nagy dinamikatartomány (HDR) technológia: | High Dynamic Range 10 (HDR10), Hybrid Log-Gamma (HLG) |
LED háttérvilágítás típusa: | Direct-LED |
Natív frissítési frekvencia: | 60 Hz |
RS-232C: | Igen |
Színhőmérséklet: | 10000 K |
Állítható színhőmérséklet: | Igen |
Látószög (vízszintes/függőleges): | 178 |
Szüksége van segítségre?
Ha segítségre van szüksége Sharp PN-ME432, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók képernyő Sharp
14 Május 2024
Útmutatók képernyő
- képernyő Neat
- képernyő Iiyama
- képernyő PreSonus
- képernyő Smart
- képernyő Dell
- képernyő JVC
- képernyő Brandson
- képernyő Cooler Master
- képernyő Abus
- képernyő Optoma
- képernyő Apple
- képernyő Boss
- képernyő Peerless-AV
- képernyő Barco
- képernyő Ernitec
Legújabb útmutatók képernyő
5 Augusztus 2024
3 Augusztus 2024
21 Június 2024
21 Június 2024
21 Június 2024
21 Június 2024
21 Június 2024
21 Június 2024
21 Június 2024
21 Június 2024